Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 65mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke65 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S
For a finishing touch that must land within a millimetre or two, the MAJ16X65-10S offers a 10 mm adjustable extend window trimmed by an external stop screw - dial in the last 10 mm of its 65 mm stroke by hand. Dia 16 output is 100.5 N at 0.5 MPa, roughly 60 N for practical work, or about 5 kg vertical lift once a 2:1 margin is halved in. Air supply 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Washdown splash and humidity are the enemy of painted minis; this one rolls a stainless barrel and a 20 um hard-chrome rod into a riveted round body that cleans up easily. Its anti-impact bumper is fixed - it softens end impact, it is not an adjustable air cushion - and the built-in magnet (standard) lets CMSG / DMSG / EMSG switches bolt on for cycle counting.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 65 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S Is Used
Cap seating on cosmetic bottles
Presses snap-on caps the last few millimetres; the 10 mm window is set once so every bottle seats to the same depth.
Test probe advance into sockets
Drives a pogo-pin probe board into PCB test sockets with a controlled 100.5 N ceiling, protecting fine contacts.
Dispensing nozzle positioning
Holds a glue or oil nozzle at a repeatable standoff; the stainless body shrugs off solvent wipes around dispensing cells.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S the Right Cylinder?
Against the alternatives: bore 20 lifts push force to 157.0 N at 0.5 MPa versus this model's 100.5 N, and no smaller MAJ bore exists, so sizing up is the only direction available. The narrow 10 mm window suits jobs where the final few millimetres are fixed at commissioning and rarely touched again. Air-off drift applies - the screw stops the extend stroke, it never clamps the load - so fit a separate holding valve if position must survive pressure loss. FA and LB mounts plus I / Y knuckles cover most fixings; M5x0.8 ports, M6x1.0 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S FAQ
At 0.5 MPa the cylinder pushes 100.5 N and pulls 86.4 N; at 0.7 MPa it reaches 140.7 N push and 120.9 N pull, with 20.5 kgf theoretical maximum at 1.0 MPa. Stroke is 65 mm, trimmable by up to 10 mm via the external stop screw. Supply 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, M5x0.8 ports, M6x1.0 rod thread.
No - the stop screw is a mechanical end stop for the extend stroke only. If air pressure is lost, the piston is free to drift, so use a separate locking valve or external clamp wherever the position must be kept through a failure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X65-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.