Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 70mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke70 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S
With the widest trim available in the -NN range for this bore, the MAJ16X70-30S gives a 30 mm extend window you set with the external stop screw - adjust it on site without removing the cylinder. Rated 100.5 N push and 86.4 N pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa.
The riveted stainless round barrel and 20 um hard-chrome rod take periodic hose-down in damp workshops far better than painted-aluminium minis, which is why food benches and outdoor gates keep choosing this format. Set the working budget near 60 N (0.6 of the rated push) for consistent cycling, and lean on the fixed anti-impact pad to soften end-of-stroke shock - it decelerates only, it is not an adjustable air cushion.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 70 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S Is Used
Washdown lane gate
The stainless barrel survives daily hose-down on a dairy packing lane while the trim screw sets exact gate travel.
Robotic gripper trim
On a light pick arm, the 30 mm window lets technicians tune gripper open travel to the part size without new tooling.
Rotary indexer latch
About 60 N of usable push at 0.5 MPa seats a detent pin on a small rotary indexing table, cycle after cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S the Right Cylinder?
Choose bore 16 when loads stay light; if you need roughly 157.0 N at 0.5 MPa instead of 100.5 N, the 20 mm bore is the same-format upgrade. The 30 mm window only shortens the extend stroke, and the stop is a mechanical end stop, so hanging or falling loads still need external locking when air fails. Mount via FA flange or LB foot, add an I or Y knuckle on the 6 mm rod, and clip a CMSG switch over the standard magnet. Supply 0.15-1.0 MPa (22-145 psi); stroke speed 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S FAQ
At 0.5 MPa: 100.5 N push and 86.4 N pull. At 0.7 MPa: 140.7 N push and 120.9 N pull. Maximum theoretical output is 20.5 kgf at 1.0 MPa. Bore 16 uses M5x0.8 ports, a 6 mm rod and M6x1.0 male thread.
The pads are fixed: they absorb the last bit of travel to soften impact but cannot be tuned. Adjustable air cushioning belongs to the MACJ family, while the MAJ stop screw only trims the extend stroke within the 30 mm window.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X70-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.