Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S
Stainless where it counts: the MAJ16X75-10S wraps a hard-chrome carbon-steel rod in a stainless round barrel, riveted to aluminium covers for a compact 75 mm stroke you can shorten by up to 10 mm at the stop screw. It drives 100.5 N at 0.5 MPa, so keep design loads near 60 N; halving the 10 kg theoretical lift leaves about 5 kg of vertical margin. Operating band 0.15-1.0 MPa (22-145 psi), 30-800 mm/s.
Sensing is wired up simply because the magnet is part of the standard build - CMSG, DMSG and EMSG switches fit without ordering a special piston. The bumper pads are fixed anti-impact elements, softer landings rather than adjustable cushions like the MACJ range, and the round riveted body slots into cramped machine frames better than a profile block.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S Is Used
PCB stop on an SMT conveyor
Pops up a stop blade to singulate boards at the reflow infeed; the 10 mm trim aligns the blade to the rail height.
Small plate lift in a jig stack
Lifts about 5 kg jig plate vertically with a 2:1 margin from the 100.5 N rating; guide the 6 mm rod externally to avoid side load.
Drawer eject on a tool cabinet
Ejects a CNC tool-setter drawer after unlock; bumper pads stop the drawer gently instead of slamming it home.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S the Right Cylinder?
With 100.5 N push and 86.4 N pull at 0.5 MPa, this Dia 16 unit handles light work; bore 20 raises push to 157.0 N when parts get heavier. The 10 mm adjust window is for final trim, not continuous re-gapping. The end screw positions the extend stroke but cannot immobilise the piston on air loss, so use an external brake where safety demands it. Magnet is built in, so CMSG / DMSG / EMSG switch placement is free of special orders. FA flange and LB foot mounts, plus I or Y knuckles; M5x0.8 ports, M6x1.0 rod thread. Keep the 6 mm rod straight: guiding the load externally preserves the 30-800 mm/s speed rating and the bumper's life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S FAQ
Design numbers: 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, and 20.5 kgf theoretical maximum force at 1.0 MPa. The 75 mm stroke trims 10 mm at the stop screw; supply 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, M5x0.8 ports, M6x1.0 rod thread.
FA flange and LB foot mounting are available, with I or Y rod knuckles for the accessory end. Because the magnet is standard, CMSG, DMSG and EMSG switches mount directly on the stainless barrel for end-of-stroke signalling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.