Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB
Bolt the MAJ16X75-40SLB down by its LB feet and the 40 mm trim window still gives full on-site control of the extend stroke within the 75 mm base. The foot-mount spreads the 100.5 N (0.5 MPa) push into the machine plate, which helps where a flange would overhang, and drive stays double acting on a 6 mm hard-chrome rod with fixed anti-impact bumpers at both stroke ends.
Porting is M5x0.8 to suit the 16 mm bore and the male rod thread is M6x1.0. The riveted stainless round body resists corrosion in damp plant corners, and since the magnet ships installed a CMSG or EMSG switch clips on for cycle counting with no retrofit. Treat about 60 N as the practical working force at 0.5 MPa and the cylinder keeps a healthy reserve.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB Is Used
Small-tray lift
Raises or lowers sample trays of up to about 5 kg onto a bench conveyor, guided by posts so the rod never sees a side load.
Washdown fixture clamp
Clamps a machined collar in a rinse-down jig, where the stainless barrel and chrome rod outlast painted housings season after season.
Hopper gate slide
Slides a small dosing gate under a hopper outlet; foot mounting absorbs the gate reaction without bracket flex.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB the Right Cylinder?
Sizing up from 16 mm takes you to the 20 mm bore and 157.0 N of push at 0.5 MPa; within this bore, add pressure rather than oversizing for mild gains. The LB feet hold the cylinder against reaction force, but the stroke adjuster is only an extend-end stop, so under sudden air loss the rod can creep and the supply needs valving for true holding. With a 75 mm stroke on a 6 mm rod, carry lateral loads on external guides to protect the bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; push reaches 140.7 N at 0.7 MPa and the bore tops out at 20.5 kgf theoretical at 1.0 MPa. Run 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s rod speed.
LB foot brackets bolt the cylinder body flat to a machine plate, spreading the load better than a single flange overhang in tight frames. The 40 mm adjuster still trims the extend stroke, and the built-in magnet keeps CMSG, DMSG or EMSG switch mounting simple.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X75-40SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.