Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S
Small machines gain a flexible actuator in the MAJ16X80-20S: 80 mm of double-acting travel with a 20 mm field-trimmable extend stroke, plus fixed anti-impact pads that soften arrival at both ends. AirTAC's MA construction rolls aluminium covers onto a stainless-steel barrel around a 20 um hard-chrome rod, so the riveted body stays sealed and compact.
At 0.5 MPa expect 100.5 N on extend and 86.4 N on retract; about 60 N of that is a sensible continuous workload, enough to shift or lift roughly 5 kg parts with a 2:1 margin. Standard M5x0.8 ports feed 0.15-1.0 MPa (22-145 psi) air, speeds run 30-800 mm/s, and the standard magnet accepts CMSG, DMSG and EMSG switches out of the box.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S Is Used
PCB test eject
Ejecting a circuit board from a test fixture, where the 20 mm trim handles fixture height changes between board types.
Carton flap tamp
Tamping a small flap on a carton coder or inkjet line, with the bumper pads quieting each cycle at stroke end.
Guard slide latch
Actuating a sliding latch or interlock door on a machine guard, where a light 60 N class push is all that is needed.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S the Right Cylinder?
If 100.5 N at 0.5 MPa is marginal, the next bores up offer 157.0 N (bore 20) and 245.3 N (bore 25) at the same pressure - useful checks before committing to this 16 mm frame. The 20 mm trim window allows occasional product changeovers without re-plumbing. Treat the stop screw purely as an extend-stroke limit; it will not hold a load if air pressure drops. Mount with FA flange or LB foot, add I or Y knuckles as needed, and rely on the built-in magnet with CMSG / DMSG / EMSG switches for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S FAQ
At 0.5 MPa: 100.5 N push, 86.4 N pull. At 0.7 MPa: 140.7 N push, 120.9 N pull. Theoretical peak is 20.5 kgf at 1.0 MPa. Ports are M5x0.8 on the covers; the rod thread is M6x1.0 and the rod is 6 mm hard-chrome steel.
Choose FA flange or LB foot mounting, with I or Y rod knuckles for linkages; the adjustable-stroke version has no SDB or back-cover options. The riveted stainless round body takes 0.15-1.0 MPa (22-145 psi) air at 30-800 mm/s, and the standard magnet works with CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X80-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.