Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ20 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S
Short travel with tuning freedom to match: the MAJ20X10-10S gives a 10 mm nominal stroke, and the external stop screw sets the exact extend point anywhere within the ordered 10 mm window. Double-acting, rated for 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s.
The 20 mm bore pushes 157.0 N and pulls 131.9 N at 0.5 MPa, so count on roughly 94 N of usable work - enough to raise about 8 kg vertically at a 2:1 safety factor. A stainless barrel and hard-chrome plated 8 mm rod keep it alive in coolant mist, and the fixed bumper pad takes the sting out of these very short, fast hits.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S Is Used
Clamp on a small CNC fixture
Lock thin aluminium blanks against a hard stop with 157 N; a 10 mm clamp travel keeps the added cycle time under a second.
Push-off on a blister cartoner
Knock finished blisters clear of the sealing station; 131.9 N of pull force resets the paddle between picks.
Index pin on a rotary dial table
The 10 mm window lets a technician pin the dial at the nearest lock hole; a CMSG switch confirms the pin is fully engaged.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S the Right Cylinder?
At 10 mm stroke this sits below every long-travel option; move to the 25 mm MAJ (245.3 N push at 0.5 MPa) if 157.0 N comes up short for the clamp. With travel this small, keep tooling centered - even a little side load works the 8 mm rod bushing hard.
The stop screw is an extend-side end stop, not a load lock, so gravity loads still need outside support when air drops. FA flange and LB foot both fit the body; I and Y knuckles handle rod-end links. The magnet is factory-fitted for CMSG / DMSG / EMSG sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S FAQ
20 mm bore, 10 mm stroke with a 10 mm adjustable extend window: 157.0 N push and 131.9 N pull at 0.5 MPa, 219.8 N and 184.7 N at 0.7 MPa, 32.0 kgf theoretical peak at 1.0 MPa. Port 1/8", rod thread M8x1.25, speed 30-800 mm/s, pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa = 215 psi.
Fixed anti-impact bumper pads are built in at both stroke ends and absorb the deceleration pulse, which matters when a 10 mm stroke cycles near the top of the 30-800 mm/s band. They are not adjustable air cushions; if tunable cushioning is required, the MACJ variant is the related choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.