Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø20mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ20 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S
The MAJ20X110-20S pairs a 110 mm extend stroke with a 20 mm on-site trim window: turn the external stop screw and the piston lands anywhere in that band, no shims or re-ordering needed. At 0.5 MPa the 20 mm bore pushes 157 N, so budget roughly 94 N for the real work and the cylinder keeps a healthy margin.
The stainless round barrel rolled onto aluminium covers and the hard-chrome plated 8 mm rod shrug off coolant mist and washdown splash, an edge painted-steel minis rarely match. A fixed anti-impact pad softens each stroke end (deceleration only, not an adjustable air cushion), the built-in magnet accepts CMSG / DMSG / EMSG switches, and air feeds through a 1/8" port shared by every bore from 20 to 40 mm.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S Is Used
Packaging line reject pusher
Ejects mislabelled cartons from a 400 mm belt at mid-shift setpoints; the 20 mm stop window lets operators retune push depth after a film change.
Sample tray indexing
Positions 110 mm tray stations in lab analysers; a DMSG switch on the standard magnet confirms each seat before the next test starts.
Light fixture clamping
Clamps small aluminium housings in a drilling jig with about 94 N of usable effort at 0.5 MPa, releasing instantly on exhaust.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S the Right Cylinder?
Sizing check: bore 16 tops out at 100.5 N push at 0.5 MPa, so step up to this 20 mm bore when you need 157 N; if the load grows past about 200 N, bore 25 offers 245.3 N in the same MA family. Keep side loads off the 8 mm rod on this 110 mm travel - guide the part externally if the stroke is long.
FA flange and LB foot mounts fit the round body, I and Y rod knuckles connect the tooling, and the standard magnet accepts CMSG / DMSG / EMSG switches. One caution: the trim screw sets extend position only, so it cannot carry a hanging load once supply air drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S FAQ
At 0.5 MPa: 157 N extend and 131.9 N retract. At 0.7 MPa: 219.8 N extend and 184.7 N retract. Theoretical maximum at 1.0 MPa is 32.0 kgf for this 20 mm bore. Running pressure spans 0.15-1.0 MPa (22-145 psi).
An external stop screw shortens the 110 mm extend stroke by up to 20 mm on site - just turn the screw to the position you need. It acts only on extension, it is a mechanical end stop rather than an air cushion, and it will not hold position if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X110-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.