Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ20 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S
Where a cylinder must land in exactly the same spot every cycle, the 10 mm window on this model is the tool: an external stop screw trims the 175 mm extend stroke down to 165 mm in small increments, no shimming or re-plumbing required. Double-acting bore 20 output is 157.0 N push and 131.9 N pull at 0.5 MPa. AirTAC builds the unit as a riveted round body - stainless barrel, hard-chrome plated 8 mm carbon-steel rod, aluminium covers - so it tolerates the splash and condensation found around washdown conveyors and outdoor stations.
Budget for roughly 94 N of usable force at 0.5 MPa rather than the full 157 N rating; that equates to lifting about 8 kg vertically once a 2:1 safety margin is applied. The fixed anti-impact pad decelerates the piston at stroke end - it is a bumper, not an adjustable air cushion, which belongs to the MACJ family. The magnet is standard, so CMSG / DMSG / EMSG switches mount without any option code.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S Is Used
Glue bead depth stop
Sets the exact reach of a glue-nozzle head on a carton erecting machine; the 10 mm trim compensates for board thickness changes between SKUs.
Inspection probe seat
Seats a measurement probe into machined housings at a repeatable depth, verified every cycle by a DMSG switch riding on the standard magnet.
Light press-fit station
Presses dowel pins into plastic brackets with about 94 N of usable push at 0.5 MPa - enough for small snap fits, not for heavy interference fits.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S the Right Cylinder?
Compare before you commit: bore 16 delivers 100.5 N push at 0.5 MPa and bore 25 delivers 245.3 N, so the 157.0 N of this bore 20 sits in the middle for jigs and light clamping work. The stop screw sets the extend position but is not a mid-stroke lock - with air removed the piston still drifts, so a separate clamp or lock is needed to hold a load. Pick FA flange or LB foot mounting, bolt on an I or Y knuckle for pivoting tooling, and keep the 8 mm rod free of side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S FAQ
At 0.5 MPa: 157.0 N push, 131.9 N pull. At 0.7 MPa: 219.8 N push. Theoretical maximum force is 32.0 kgf at 1.0 MPa. The cylinder runs on 0.15-1.0 MPa (22-145 psi) of 40 um filtered air at 30-800 mm/s.
The MAJ20X175-10S uses a stainless-steel round barrel with a 20 um hard-chrome plated carbon-steel rod, so the pair copes with humidity, washdown splash and outdoor exposure far better than painted or plain aluminium mini cylinders. The aluminium-alloy covers are riveted onto the tube, giving a compact sealed body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ20X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.