Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S
Fine tuning is the whole point of the -10 suffix: on the MAJ25X175-10S an external stop screw trims the 175 mm extend stroke down by up to 10 mm, so commissioning engineers can nail an exact end position without swapping hardware. Double-acting throughout, it runs at 30-800 mm/s on 0.15-1.0 MPa (22-145 psi) filtered air.
At 0.5 MPa this 25 mm bore pushes 245.3 N; keep the real working load near 147 N (about 0.6 of the rating) for long seal and rod life. The heterogeneous two-way piston seal doubles as a grease store inside the riveted stainless barrel, and the hard-chrome plated carbon-steel rod stands up to damp, dusty or outdoor air. A magnet ships as standard, ready for CMSG / DMSG / EMSG switches.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S Is Used
Glue-bead end stops
Set a glue head's extend limit to the millimetre for consistent bead length on 175 mm long seams, trimmed within the 10 mm window.
Lab dispensing slides
Position a dispensing nozzle over microplate wells; 245.3 N at 0.5 MPa gives crisp, repeatable motion and the stainless body wipes clean easily.
Small-press feeders
Feed blanks into a small press die; the fine 10 mm trim aligns the feed finger exactly, while the standard magnet feeds stroke-confirm signals to the PLC.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S the Right Cylinder?
The 20 mm bore pushes 157.0 N and the 32 mm bore 402.2 N at 0.5 MPa, bracketing this 25 mm model for mid-range duty. Where you need the 175 mm reach with a precise fixed stop, the narrow 10 mm window is ideal. Remember the stop screw limits extension only; it is not a brake, and the rod will drift if air is lost. Mount via FA flange or LB foot and add I or Y rod knuckles where the tooling needs a pivoting joint - adjustable models omit the SDB option. Keep side load low on the 10 mm rod across the long stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S FAQ
Figures for the 25 mm bore: 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push at 0.7 MPa, and a 50 kgf theoretical maximum at 1.0 MPa. Speeds run 30 to 800 mm/s at 0.15-1.0 MPa (22-145 psi).
No. Every MAJ cylinder carries a built-in magnet as standard, so CMSG, DMSG and EMSG switches clamp straight onto the stainless barrel without a special-order piston. This bore takes 1/8" ports and the rod thread is M10x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.