Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S
A 175 mm stroke that you can pull back to 100 mm on the machine - the MAJ25X175-75S pairs double-acting power with a 75 mm adjustable extend window set by an external stop screw. At 0.5 MPa the bore 25 piston pushes 245.3 N and pulls 206.1 N, rising to 343.4 N at 0.7 MPa. The fixed anti-impact bumper pads soften stroke-end deceleration; they are not an adjustable air cushion - that belongs to the MAC family.
Build quality suits damp lines: a stainless round barrel riveted to aluminium-alloy covers, with a hard-chrome plated rod that shrugs off mild corrosion in washdown-adjacent or outdoor positions. Every MA-series cylinder carries a built-in magnet as standard, so CMSG, DMSG or EMSG reed switches clip on without a special piston. As a planning figure, budget roughly 147 N of usable push at 0.5 MPa - in vertical terms that is about 25 kgf, or around 12 kg lifted with a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S Is Used
Carton push-off
At 245 N push and 175 mm of travel, the cylinder sweeps formed cartons off a case-packer infeed without a secondary pusher, and the 75 mm window lets you re-target the park position when carton sizes change.
Reject gate
A sliding reject gate on a bottling line needs about 147 N of working force at 0.5 MPa - well inside this bore 25 output - and the stop screw sets exactly how far the gate opens.
Guard door actuation
Sliding machine-guard doors weighing up to about 12 kg track smoothly at 30-800 mm/s, with the standard magnet and an EMSG switch confirming closed position.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S the Right Cylinder?
At 245.3 N push (0.5 MPa) this bore 25 sits between the MAJ20 (157.0 N) and the MAJ32 (402.2 N); step up if your tooling mass or friction load climbs. The stop screw is a mechanical end stop for the extend stroke only - it will not hold a load mid-stroke, and the piston drifts if air is lost. Mount with the FA flange or LB foot, add an I or Y knuckle on the rod, and feed it through the 1/8" port at 0.15-1.0 MPa (22-145 psi), 30-800 mm/s. With 175 mm of rod out, guide side loads externally; the bushing is not a side-load bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N; at 0.7 MPa the figures are 343.4 N push and 288.5 N pull. Theoretical maximum is 50 kgf at 1.0 MPa. The extend stroke is adjustable over 75 mm, air supply is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, port 1/8", rod 10 mm with M10x1.25 male thread.
No. AirTAC builds the piston magnet into every MA-series cylinder as standard, so CMSG, DMSG or EMSG magnetic switches clip directly onto the barrel for end-of-stroke or intermediate sensing with no special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X175-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.