Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S
Ten millimeters of on-site trim is often all a fixture needs, and the MAJ25X200-10S provides exactly that: an external screw that shortens the 200 mm extend travel by up to 10 mm. Push force at 0.5 MPa is 245.3 N; keep applied work near 147 N to stay comfortably inside the rating, enough to lift roughly 12 kg vertically at a 2:1 factor.
AirTAC machines the riveted stainless tube to tight tolerances, so the hard-chrome rod runs smoothly over the full 200 mm. Stroke ends meet fixed bumper pads - they decelerate the piston but are not adjustable cushions; if tunable end damping is needed, the MACJ family adds that. Every unit ships with its magnet installed, so CMSG, DMSG or EMSG reed switches bolt on without options.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S Is Used
Fixture clamp final stop
Clamps aluminium billets in a machining fixture; the 10 mm trim sets exact contact depth after tooling changes.
Micro-dosing plunger
Drives a syringe plunger on a small filling rig; the stop screw locks the dose endpoint between batches without repositioning brackets.
CNC chip-drawer latch
Closes the sliding chip drawer on a machining centre; a CMSG switch driven by the standard magnet confirms full extension before the spindle restarts.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S the Right Cylinder?
Compare neighbours first: the 20 mm bore gives 157 N at 0.5 MPa and the 32 mm gives 402.2 N, so 25 mm fits when the load sits between those bands. Supply air at 0.15-1.0 MPa (22-145 psi); speed range 30-800 mm/s. Note the adjuster is an extend-end stop, not a holding brake - without pressure the rod can still be pushed back.
Choose FA flange or LB foot mounting, with I or Y knuckles for pivoting loads. On a 200 mm travel, keep side load off the 10 mm rod by guiding the payload externally.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S FAQ
Push 245.3 N and pull 206.1 N at 0.5 MPa; at 0.7 MPa push climbs to 343.4 N and pull to 288.5 N; theoretical peak 50.0 kgf at 1.0 MPa. Ports are 1/8" and the male rod thread is M10x1.25.
No. The fixed pads only soften final deceleration to protect the covers; damping is not adjustable. For adjustable cushioning, AirTAC offers the MACJ series. Stroke speed here can run anywhere from 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.