Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S
A 30 mm window splits the difference between coarse and fine adjustment, and the MAJ25X200-30S applies it to a 200 mm extend stroke with one external screw. The 25 mm bore produces 245.3 N at 0.5 MPa and 343.4 N at 0.7 MPa; sizing work at roughly 147 N leaves headroom, about a 12 kg vertical lift at a 2:1 margin.
Because the barrel is stainless and the rod carries a 20 um hard-chrome plating, the cylinder tolerates humid plants and occasional hose-down that would blister painted minis. Riveted aluminium covers keep the round body compact in tight frames. Stroke ends hit fixed anti-impact bumpers, and the standard magnet accepts CMSG, DMSG or EMSG position switches out of the box.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S Is Used
Vacuum-form sheet feed
Advances thermoformed sheet into a cutting nest; the 30 mm trim aligns the feed stop when sheet sizes change on the former.
Connector test rig
Seats connectors into a burn-in socket with 245.3 N of push; engineers retune the stop depth for each new shell style.
Washer ejection press
Ejects stamped brass washers from a small die; the extend end is set anywhere between 170 and 200 mm to suit die changes.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S the Right Cylinder?
If 245.3 N at 0.5 MPa feels thin, the 32 mm bore offers 402.2 N; if generous, the 20 mm bore at 157 N is the leaner pick. Work within 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s. The adjuster caps extend travel only - it will not catch a falling or drifting piston when air pressure is lost, so fit an external brake where that matters.
Mount on an FA flange or LB foot and fit I or Y knuckles if the load swings. Long 200 mm strokes amplify rod bending, so payload guides should carry side loads rather than the 10 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S FAQ
245.3 N push and 206.1 N pull at 0.5 MPa; 343.4 N push and 288.5 N pull at 0.7 MPa; 50.0 kgf theoretical maximum at 1.0 MPa. Speeds from 30-800 mm/s are supported with 1/8" ports.
Yes - the magnet is standard in the piston, so CMSG, DMSG and EMSG switches mount directly for extend and retract signals. The 1/8" ports and M10x1.25 male rod thread keep piping and tooling simple.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.