Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S
A 25 mm bore, double-acting round-body mini cylinder whose extend stroke is trimmed on site by an external stop screw anywhere within the ordered 20 mm window (60 mm down to 40 mm). At 0.5 MPa it pushes 245.3 N, so plan real workloads near 147 N to keep a healthy margin. The stainless barrel and 20 um hard-chrome plated rod shrug off mild corrosion and washdown, an edge over painted minis in damp, food or outdoor spots.
Stroke-end impact is softened by fixed anti-impact bumper pads (deceleration only - adjustable air cushioning belongs to the MACJ family). The magnet is built in as standard, so CMSG / DMSG / EMSG switches drop onto the barrel without a special piston. Air supply runs 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S Is Used
Drill jig clamp
Clamps small aluminium housings against a drill jig on a benchtop fixture; the 20 mm trim sets contact depth in the field without a new cylinder.
Tube stoppering press
Presses caps onto 50 mL centrifuge tubes at a compact lab filling bench running near 0.4-0.5 MPa.
Cap diverter lane
Kicks misprinted plastic caps off a 200 mm wide conveyor lane; a DMSG switch confirms the extend before the next part arrives.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S the Right Cylinder?
Compare both directions before committing: the 20 mm bore pushes 157 N at 0.5 MPa and the 32 mm bore reaches 402 N, so 245 N sits squarely in the middle for jigs and light clamping. The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - the rod can still drift if air is lost, so add a valve or lock where holding matters. Mounting is FA flange or LB foot, with I / Y rod knuckles available; ports are 1/8" and rod thread M10x1.25. Keep side loads light on the 10 mm rod across the 60 mm span.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S FAQ
At 0.5 MPa: 245.3 N push and 206.1 N pull. At 0.7 MPa: 343.4 N push and 288.5 N pull. Theoretical peak is 50 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) of 40 um filtered air at 30-800 mm/s.
No. Fixed anti-impact bumper pads soften the impact at each stroke end, but they decelerate only; adjustable air cushioning is a feature of the AirTAC MACJ family instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.