Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S
With the 30 mm trim window, the MAJ25X60-30S lets the extend stroke land anywhere between 30 mm and the full 60 mm, tuned by a stop screw on the cylinder. This 25 mm bore delivers 245.3 N of push at 0.5 MPa; vertically that is about 25 kgf, or roughly 12 kg once a 2:1 lift margin is applied - handy when matching a real part weight. A riveted stainless barrel with aluminium covers keeps the body short and sealed.
The piston rod is carbon steel, hard-chrome plated to 20 um, so light washdown and outdoor duty cause little trouble. A magnet ships inside the piston as standard for CMSG / DMSG / EMSG sensors. Fixed anti-impact pads absorb stroke-end shock, though they are not adjustable cushions.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S Is Used
Bakery tray lid tuck
Folds the top cardboard flap on bakery trays at a small packing station; the 30 mm window absorbs tray height variation.
Rotary index stop
Acts as the part-present stop on a 6-station rotary assembly dial, retracted and extended every cycle.
Tote ejector
Pushes small plastic bins off the shelf of a mini storage carousel under warehouse picking software.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S the Right Cylinder?
Right-sizing check: 157 N at 0.5 MPa (20 mm bore) is often enough for diverting, while 402 N (32 mm bore) suits heavier clamps - 245 N covers the gap. Remember the adjuster only limits the extend stroke; it is not a brake and the piston will creep if air fails. The standard magnet pairs with CMSG / DMSG / EMSG switches for end-of-stroke confirmation. FA flange and LB foot mounts, plus I / Y knuckles, and 1/8" ports on this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S FAQ
Push is 245.3 N and pull 206.1 N at 0.5 MPa; at 0.7 MPa they rise to 343.4 N and 288.5 N. Maximum theoretical force is 50 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Yes. A magnet is built into the piston as standard equipment, so CMSG, DMSG and EMSG switches clip onto the barrel with no special-order piston or delay.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.