Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S
With a trim window as wide as the stroke itself, the MAJ25X75-75S can be set anywhere from near-zero to full 75 mm extend travel using its external stop screw - one part number covers an entire family of stroke lengths. Expect 245.3 N push and 206.1 N pull at 0.5 MPa from the 25 mm bore, and budget around 147 N for the actual job at 0.5 MPa so the cylinder is never run at its ceiling.
Body construction follows the MA standard: a riveted stainless-steel round barrel, aluminium-alloy end covers, and a hard-chrome 10 mm carbon-steel rod. Fixed anti-impact pads decelerate the piston at both stroke ends, and since the magnet is built in as standard, CMSG / DMSG / EMSG switches bolt on whenever position confirmation is needed. Full stroke lift capacity works out to about 13 kg vertically with a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S Is Used
Prototype and low-volume jig setup
One cylinder serves many jig variants in a prototype cell because the stop screw re-cuts the stroke per setup; a CMSG switch confirms the new stroke length each run.
Machine-guard lid closer
Lowers a small interlocked access lid; about 13 kg vertical lift capability with margin covers most aluminum guard lids and the stainless body tolerates coolant mist.
Repair-shop universal replaceable
Kept as a workshop spare for mini cylinder swaps - the adjustable window lets it replace various fixed-stroke 25 mm units on conveyors, clamps and lifts without waiting on a custom order.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S the Right Cylinder?
This is the flexibility pick: if your stroke requirement may change during commissioning, the full-width 75 mm window beats ordering several fixed-stroke MA cylinders (which otherwise span 157 N at 20 mm to 402.2 N at 32 mm bore - this 25 mm sits between). Air connection is 1/8 inch, rod thread M10x1.25. FA flange or LB foot mounts attach to machine plates; I / Y knuckles suit linkages. Two cautions: the stop screw cannot lengthen travel beyond 75 mm, and it is an end stop only - it will not clamp or hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S FAQ
MAJ25X75-75S: 25 mm bore, 75 mm stroke, adjustable extend window 75 mm (the full stroke). Double-acting forces: push 245.3 N, pull 206.1 N at 0.5 MPa; push 343.4 N, pull 288.5 N at 0.7 MPa; theoretical maximum 50 kgf at 1.0 MPa. Pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, 1/8 inch port, rod thread M10x1.25, 10 mm rod.
Mounting: FA flange, LB foot, plus I and Y rod knuckles for linkage-type tooling; the round riveted body keeps the installed footprint small either way. Sensing: the magnet is included in every piston as a standard feature, so CMSG, DMSG and EMSG switches mount directly on the stainless barrel for end-of-stroke or trimmed-position signals - no special-order version is needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.