Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S
Shorten the extend stroke anywhere along its 100 mm span: the external stop screw on the MAJ32X100-100S re-trims travel on site within the ordered 100 mm window, on a 32 mm bore that delivers 402 N push at 0.5 MPa. The round barrel is stainless steel rolled tight against aluminium-alloy covers, a riveted body that resists coolant mist and outdoor exposure without paint to flake.
Treat 402 N as the ceiling and budget near 241 N for the actual job at 0.5 MPa so seals and linkage stay within a healthy margin. The fixed anti-impact pad takes the sting out of the stroke ends by decelerating the piston - it is not an adjustable air cushion, which is the MAC family's territory.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S Is Used
Merge-gate actuator
A 100 mm throw pushes cartons from a takeaway conveyor onto a reject lane; the trim window lets line staff shorten the stroke when lane spacing changes, with 402 N of push at 0.5 MPa to work against stiff gate return springs.
Fixture clamp with tooling change
Different casting sizes on a machining fixture demand different clamp travel; the 100 mm window is reset at changeover with a screwdriver instead of swapping the cylinder.
Battery-change locating pin
Extended pins locate an exchange battery tray on the transfer station; with 346 N of pull at 0.5 MPa the 12 mm rod retracts the pin reliably against slide friction.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S the Right Cylinder?
Choose the 25 mm bore (245 N push at 0.5 MPa) for light diverting duties or 40 mm (628 N) when clamping force dominates; this 32 mm unit splits the difference. Over a 100 mm stroke, keep side loads off the 12 mm chrome rod by guiding the load externally, or fit an I or Y knuckle for minor misalignment. Mount with FA flange or LB foot; adjustable models offer no SDB. The stop screw fixes the extend end position only - with air lost the rod still drifts, so add a counterbalance for suspended loads. The standard magnet suits CMSG / DMSG / EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S FAQ
At 0.5 MPa the bore pushes 402 N and pulls 346 N; raise supply to 0.7 MPa for 563 N push and 484 N pull, with a theoretical peak of 82 kgf at 1.0 MPa. Pressure range is 0.15-1.0 MPa (22-145 psi), speed is 30-800 mm/s, and the extend stroke can be trimmed by the stop screw anywhere inside the -100 window.
No. Every MA-series cylinder, including this one, carries a built-in magnet as standard, so CMSG, DMSG and EMSG reed switches mount directly on the stainless barrel and read end or intermediate positions without a special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.