Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S
A 32 mm bore driving a 12 mm hard-chrome rod gives the MAJ32X100-10S 402 N of push at 0.5 MPa across a 100 mm stroke, while the external stop screw narrows the extend travel by up to 10 mm without swapping the cylinder. The riveted round barrel pairs stainless steel with aluminium-alloy covers, a build that tolerates coolant splash and outdoor dust where painted minis start to corrode.
For vertical work the same 0.5 MPa figure works out near 41 kgf, so with a 2:1 margin expect roughly 20 kg of lifting capability - match that against part plus tooling weight. Bear in mind the stop screw sets the end of stroke only; it is not a mid-stroke lock, and on air loss the piston can still move.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S Is Used
Tote lift on a pick module
Raising a 15 kg tote with its frame stays inside the roughly 20 kg vertical capability at 0.5 MPa with a 2:1 margin; the 100 mm stroke lifts the tote to conveyor height each pick.
Camera inspection stage
A vision camera rides the 100 mm stroke over inspection trays; the 10 mm stop-screw trim sets the near-focus position once, then the magnet and a DMSG switch confirm every cycle.
Light press-fit operation
Pressing dowel pins into plastic housings needs under 241 N of working force at 0.5 MPa; the 32 mm bore supplies 402 N with headroom, and the fixed bumper pads soften the bottom of the press.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S the Right Cylinder?
Lighter sorting jobs fit the 25 mm bore at 245 N push (0.5 MPa); heavy clamps go to the 40 mm bore at 628 N; this 32 mm unit covers the middle ground. With 100 mm of travel, guide side loads externally to protect the rod, and use an I or Y knuckle where linkage misalignment is small. The narrow 10 mm trim suits setups needing almost full travel plus a small end adjustment. Mount via FA flange or LB foot; SDB is not offered on the adjustable series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S FAQ
Push at 0.5 MPa is 402 N and pull is 346 N; at 0.7 MPa they become 563 N and 484 N, topping out at 82 kgf theoretical at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s, and the -10 window defines how far the stop screw can shorten the 100 mm extend stroke.
They soften it. Fixed anti-impact pads built into the covers decelerate the piston near each end, cutting noise and shock at 30-800 mm/s; they are not adjustable air cushions - for that, choose the MACJ family. No cushion-setting screws need touching at commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.