Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S
A 32 mm bore gives the MAJ32X100-30S a 402 N push at 0.5 MPa (346 N on retract), and the -30 code means an external stop screw trims the extend stroke anywhere inside a 30 mm window without touching the ordered 100 mm travel. Air on both ports makes it fully double-acting, and the fixed bumper pad soaks up stroke-end shock - it decelerates, it is not an adjustable air cushion like the MAC family.
The riveted stainless round barrel with its 12 mm hard-chrome rod resists mild corrosion in wet or food-area spots, a real edge over painted-steel minis. For sizing, count on roughly 241 N of practical work at 0.5 MPa rather than the full 402 N rating. Every unit ships with a built-in magnet, so CMSG, DMSG or EMSG switches clip straight on without a special piston order.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S Is Used
Carton forming station
On a secondary packaging line, the 100 mm stroke ejects a formed carton while the 30 mm trim lets technicians level the ejection face across different case sizes.
Benchtop dispensing press
A laboratory filler uses about 241 N of usable thrust to seat stoppers into 50 ml vials; the trimmed extend stroke stops the ram at a repeatable depth.
Tote divert gate
At a conveyor junction, the cylinder kicks 8 kg totes onto a spur line; with a 2:1 margin the bore lifts about 20 kg vertically, well clear of the load.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S the Right Cylinder?
Next to a MAJ25 bore (245 N push at 0.5 MPa) this 32 mm unit nearly doubles the force; if your load needs over 400 N, step up to the MAJ40 barrel at 628 N. The -30 adjuster is a mechanical end stop for the extend stroke, so it sets where the rod lands but will not hold a load if air drops - fit a locking valve for that. FA flange or LB foot mounting, plus I and Y rod knuckles, cover most fixture layouts, and the 1/8" port keeps plumbing simple.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S FAQ
At 0.5 MPa the 32 mm bore pushes 402.2 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N and pull to 483.8 N. Theoretical maximum at 1.0 MPa is 82 kgf. Supply runs 0.15-1.0 MPa (22-145 psi) and speed 30-800 mm/s; for sizing, treat about 241 N as the practical working force at 0.5 MPa.
The magnet is built in as standard, so CMSG, DMSG or EMSG reed switches mount directly on the stainless barrel with no special-order piston. Mounting options are FA flange, LB foot, plus I and Y rod knuckles; the -30 adjuster itself is a fixed end stop with anti-impact bumper pads, not a load-holding brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X100-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.