Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S
The widest trim window in this 175 mm family: an external stop screw on the MAJ32X175-40S shaves up to 40 mm off the extend stroke on site. Expect 402 N push and 346 N pull at 0.5 MPa, 563 N at 0.7 MPa. The stainless barrel with riveted aluminium covers and a hard-chrome plated 12 mm rod is a genuine washdown survivor in wet or outdoor cells.
Lifting math: 402 N is about 41 kgf, so halving for a 2:1 margin leaves roughly 20 kg of vertical lift. Anti-impact bumpers are fixed, not adjustable cushions, the piston magnet is fitted as standard for CMSG / DMSG / EMSG switches, and operation runs 30-800 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S Is Used
Harness crimp bench press
Presses crimp terminals onto wire harnesses at a bench cell, dialing the extend stroke back 40 mm for short connectors.
DC sorter carton gating
Swings the diverter gate that routes cartons between lanes in a distribution-center sorter, 175 mm of travel per divert.
Pharma vial tray loading
Lowers filled vials into deep trays on a pharma filling line, lifting about 20 kg with a 2:1 vertical margin.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S the Right Cylinder?
Sizing check: at 0.5 MPa a 25 mm bore tops out at 245 N and a 40 mm bore reaches 628 N, so the 32 mm MAJ covers mid-range tooling across a 175 mm stroke. The -40 window is an extend-end stop rather than a mid-stroke holding brake, so expect rod drift if supply air fails. FA flange and LB foot mounts are listed, rod knuckles I and Y are available, and the magnet comes installed from the factory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S FAQ
Push and pull at 0.5 MPa are 402 N and 346 N respectively; at 0.7 MPa they become 563 N and 484 N. At the 1.0 MPa theoretical limit the bore produces 82 kgf. Proof pressure is 1.5 MPa (215 psi).
FA flange and LB foot brackets bolt to the round body, while I and Y rod knuckles adapt the M10x1.25 threaded rod to swivel linkages. The adjustable-stroke version has no SDB or back-cover mounting code, so plan fixtures around FA, LB, I or Y.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X175-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.