Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S
Longer reach without a bulky body is the deal here: the MAJ32X200-100S pairs a 200 mm stroke with a 100 mm trim window, so half the travel can be dialed in on the machine. Push force at 0.5 MPa is 402.2 N and pull 345.6 N, rising to 563 N push at 0.7 MPa - a class that comfortably handles totes, gates and small press work; the same 402.2 N equals about 41 kg of vertical lift, a practical 20 kg once a 2:1 margin is taken.
The stainless round barrel, riveted aluminium-alloy covers and hard-chrome plated 12 mm rod shrug off washdown spray and outdoor humidity better than painted-steel minis, an edge in food-adjacent and yard equipment. Fixed anti-impact pads cushion both stroke ends, and the built-in magnet is standard, ready for CMSG, DMSG or EMSG switches. Spec window: 0.15-1.0 MPa (22-145 psi) filtered air, 1.5 MPa (215 psi) proof, -20 to +70 C, 30-800 mm/s, 1/8" ports, M10x1.25 male rod thread.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S Is Used
Curing oven door on a paint line
The cylinder slides a small oven door open the full 200 mm for batch loading and is trimmed to 100 mm for venting between cycles.
Tote pusher at a picking wall
A plunger nudges picking totes from an infeed lane onto the takeaway conveyor; bumper pads keep the metal-to-metal clatter down at high cycle rates.
Magazine elevator for steel bushings
The rod lifts a stack plate of steel bushings of about 20 kg per cycle (2:1 margin) up to the feeder bowl on a lathe bar-feed magazine.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S the Right Cylinder?
At 200 mm of travel, keep external guides carrying the side loads: a long thin 12 mm rod will bend if a mechanism leans on it, so align the FA flange square to the load path or pick the LB foot with a supporting rail. Bore 32 at 402.2 N push (0.5 MPa) sits between the 25 mm bore at 245.3 N and the 40 mm bore at 628.3 N - upsize when the moving mass grows. The stop screw sets the extend end point anywhere inside the 100 mm window but is purely a mechanical end stop; it does not lock the rod against drift when air pressure drops. FA, LB, I and Y mounting options plus the standard magnet round out the spec.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S FAQ
The 32 mm bore pushes 402.2 N and pulls 345.6 N at 0.5 MPa; at 0.7 MPa push is 563 N and pull 483.8 N. Maximum theoretical force at 1.0 MPa reaches 82 kgf. Working pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi).
Guide the load externally so side loads stay off the 12 mm hard-chrome rod, and square the FA flange or LB foot to the direction of travel before final tightening. The anti-impact pads soften the ends of travel but are fixed - for adjustable cushioning look at the MACJ family instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.