Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S
Short travel, full force: the MAJ32X30-10S moves its rod just 30 mm yet pushes 402 N at 0.5 MPa, ideal for clamps, stops and press-fit checks in tight frames. The extend stroke can be trimmed by up to 10 mm with the external stop screw, locking in exact part depth after the first setup.
The 32 mm bore returns 345.6 N at 0.5 MPa and tops out at 563 N forward when 0.7 MPa is available. Its riveted stainless tube and hard-chrome 12 mm rod tolerate coolant mist around machine tools, and the built-in magnet feeds CMSG / DMSG / EMSG switches as standard. After derating to 60 percent, about 241 N is available for real work at 0.5 MPa.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S Is Used
Fixture clamp
Clamps aluminium housings in a CNC fixture with 402 N of push; the 10 mm trim absorbs tolerance stack between material batches.
Go / no-go gauge drive
Drives a gauge pin into machined bores on an inspection bench, the 30 mm stroke keeping cycle times low on high-volume parts.
Tab forming press
Forms small tabs on sheet brackets during electronics enclosure assembly, where short travel suits thin stock and 402 N is ample.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S the Right Cylinder?
Against neighbours: a 25 mm bore gives 245 N at 0.5 MPa while the 40 mm bore reaches 628 N - choose 32 mm when the load sits between those bands. Ports are 1/8"; rod thread M10x1.25; mounting via FA flange or LB foot, with I and Y rod knuckles as options. The stop screw limits only the extend end and will not lock the piston against drift if air pressure fails, so use a locking valve where a clamp must stay shut. Because travel is just 30 mm, check tool clearance for the stop-screw adjustment at full retract.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S FAQ
At 0.5 MPa: 402.2 N push, 345.6 N pull. At 0.7 MPa: 563.0 N push, 483.8 N pull. Theoretical maximum 82 kgf at 1.0 MPa. Double-acting on 0.15-1.0 MPa (22-145 psi) air, speed 30-800 mm/s, extend stroke adjustable within 10 mm.
The stainless barrel and hard-chrome plated rod survive coolant mist, humidity and outdoor exposure that rust painted steel minis. The riveted round construction stays compact, and the standard magnet accepts CMSG / DMSG / EMSG switches without a special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.