Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S
A compact 32 mm bore workhorse for tight envelopes: the MAJ32X30-20S runs double-acting on both faces and carries an external stop screw that trims the extend stroke anywhere inside its ordered 20 mm window. Push force reaches 402 N at 0.5 MPa (563 N at 0.7 MPa), ample for short-reach clamping and ejection duties.
The stainless barrel with hard-chrome plated rod shrugs off washdown and mild corrosion far better than painted minis, while the riveted round body stays slim in crowded machines. Plan on roughly 241 N of real work at 0.5 MPa rather than the full rating, or about 20 kg of vertical lift once a 2:1 margin is applied.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S Is Used
CNC jig clamp
Repeatably clamps aluminium brackets in a drilling fixture; the 20 mm window lets the setter land the rod on each part without shimming.
Sampling pusher
Kicks small vials into a check station on a pharmaceutical line, the stop screw set to a 12 mm effective reach.
Micro ejector
Ejects stamped clips from a soft die in a press shop, the fixed bumper pad absorbing the breakaway hit at stroke end.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S the Right Cylinder?
Between the 25 mm bore (245 N push at 0.5 MPa) and the 40 mm bore (628 N), this 32 mm size sits in the mid-thrust band with a 12 mm rod and 1/8" port. If the load needs about 241 N of pushing effort, you are already sized right; step down to the 25 mm bore when force budget is tight.
Remember the stop screw only limits how far the rod extends - it is not a mid-stroke lock, so with air lost the piston can still drift. Choose FA flange or LB foot mounting, and the standard-built magnet accepts CMSG / DMSG / EMSG switches for end-position signals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S FAQ
At 0.5 MPa the 32 mm bore pushes 402 N and pulls 346 N; at 0.7 MPa that rises to 563 N push and 484 N pull. Theoretical maximum at 1.0 MPa is about 82 kgf. Speed range is 30-800 mm/s over a 0.15-1.0 MPa (22-145 psi) supply.
An external stop screw shortens the extend stroke anywhere within the ordered 20 mm window - you never lengthen it past the 30 mm catalog stroke. It acts as a mechanical end stop only: it will not hold a load in position if air pressure drops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X30-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.