Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S
When a long 300 mm reach needs only a hair of adjustment, the MAJ32X300-10S supplies a 10 mm stop-screw window - ideal for fine end-point trims on gantries and linear feeders without re-machining brackets. Extension force is 402 N at 0.5 MPa (563 N at 0.7 MPa), served by a 1/8" port on the 32 mm bore.
Its stainless round tube and 20 um hard-chrome rod stand up to washdown corners of the plant, while the heterogeneous piston seal doubles as a grease store to stretch maintenance intervals. Budget about 241 N of the 0.5 MPa push for real work - that is the figure to size tooling weight against.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S Is Used
Line changeover
Trims the stop point of a bottle pusher when a new container height reaches the line - a 10 mm turn of the screw, no bracket work.
Dosing press setpoint
Sets a precise final reach on a small dosing press that meters adhesive into electronic assemblies.
Vertical indexer stop
Caps the up-stroke of a lift station on an assembly conveyor so trays index to the same height every cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S the Right Cylinder?
Sizing check: the 25 mm bore pushes 245 N at 0.5 MPa and the 40 mm bore reaches 628 N, so this 32 mm middle band with 402 N suits mid-weight transfers across 300 mm. Guide the load on an external rail and mount via FA flange or LB foot to protect the 12 mm rod from bending on long strokes.
Note the trim only shortens extension - the ordered 300 mm is the ceiling - and the stop is not a load-holding device: without air the piston can still be displaced. The built-in magnet works with CMSG / DMSG / EMSG switches for end-of-travel signals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S FAQ
Expect 402 N push / 346 N pull at 0.5 MPa and 563 N push / 484 N pull at 0.7 MPa; theoretical maximum is about 82 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa = 215 psi, speed 30-800 mm/s, with air filtered to 40 um.
Long travels rarely need wide trim ranges - a 10 mm screw adjustment absorbs wear, seal seating and last-minute fixture tweaks, while the stainless barrel and hard-chrome rod keep corrosion at bay in humid or washed-down areas. The magnet comes standard, so sensor drops are plug-on.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X300-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.