Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S
The MAJ32X350-10S pairs a 350 mm stroke with a 10 mm extend-trim window, so the outer limit of travel can be backed off on site using the external stop screw. It is double-acting throughout: at 0.5 MPa it pushes 402.2 N and pulls 345.6 N, rising to 563.0 N and 483.8 N at 0.7 MPa, with a theoretical 82 kgf ceiling at 1.0 MPa.
Work the numbers before ordering: 0.6 x 402.2 N leaves roughly 241 N for the actual job at 0.5 MPa, and halving the 41 kgf vertical-lift equivalent gives a comfortable 20 kg lift rating in practice. The stainless barrel plus hard-chrome rod combination is what separates this round-body mini from painted cylinders in food, outdoor or humid cells, and the fixed bumper pads - a deceleration aid, not an adjustable cushion - protect both ends of the long travel. The piston magnet comes as standard, so CMSG, DMSG or EMSG switches clip straight on.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S Is Used
Bottling line gate
Slides a washdown gate between filler and labeler; the stainless barrel tolerates daily caustic rinse and the 10 mm trim lets the gate seating be nudged without re-plumbing.
Fixture-plate lift
Raises an 18 kg aluminium fixture plate on an assembly-cell riser - roughly 20 kg is the practical vertical rating with a 2:1 margin at 0.5 MPa.
Canning-line reject pusher
Kicks off-spec cans over 350 mm of travel; 402.2 N of push at 0.5 MPa clears a full lane, and a CMSG switch confirms the home position.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S the Right Cylinder?
If 402.2 N at 0.5 MPa is more than the job needs, the MA25 develops 245.3 N under the same pressure; when the load grows, the MA40 reaches 628.3 N. A 350 mm stroke puts real leverage on the 12 mm rod, so guide the load externally rather than letting the rod carry side force. FA flange and LB foot brackets, with I / Y knuckles as accessories, cover most mounting plans. And a sizing caution: the stop screw sets only where the extend stroke finishes - it is no substitute for a load-holding valve if the machine must stay put on air failure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa the figures are 563.0 N push and 483.8 N pull. The theoretical maximum at 1.0 MPa is 82 kgf. Supply runs 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, the air port is 1/8" and the male rod thread is M10x1.25.
An external stop screw limits the extend stroke to anywhere from 350 mm down to 340 mm - it shortens travel, never lengthens it past the ordered stroke. It acts only at the end of travel as a mechanical stop; it is not a mid-stroke brake, and the rod will still drift if air pressure is lost. Fixed bumper pads soften the touchdown.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.