Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S
A 30 mm trim window makes the MAJ32X350-30S easy to dial in: fit the cylinder, run it once, then turn the external stop screw until the extend stroke lands exactly where the machine needs it - anywhere from 320 mm to the full 350 mm. Double-acting, it develops 402.2 N of push and 345.6 N of pull at 0.5 MPa.
The build is a riveted round body: stainless tube rolled onto aluminium-alloy covers, with a 20 um hard-chrome plated 12 mm rod that shrugs off washdown and damp plant air far better than painted minis. Theoretical vertical lift at 0.5 MPa is about 41 kgf; planning for roughly 20 kg with a 2:1 margin keeps the cylinder well inside its comfort zone. The piston magnet is standard, so CMSG, DMSG or EMSG switches drop on without a special-order piston.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S Is Used
Saw infeed stop
Sets timber or aluminium extrusion length on a cut-off saw; the 30 mm window absorbs blade-kerf and fence adjustments without shimming.
Carton diverter
Sorts cartons at a belt junction; 345.6 N of pull retracts the blade sharply for 30-800 mm/s cycling under PLC control.
Tray indexing
Advances bakery trays onto a conveyor in 350 mm pitches; the magnet-fed DMSG switch counts each index for the line controller.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S the Right Cylinder?
Downsize to the MA25 (245.3 N push at 0.5 MPa) when the task is lighter, or upsize to the MA40 (628.3 N) when it grows. With 350 mm of stroke, external guiding is worth specifying - long rods magnify any side load. FA flange or LB foot mounting, I / Y knuckles as accessories, and a standard magnet for CMSG / DMSG / EMSG switches round out the spec. The 30 mm adjuster is purely an extend-stroke end limit; it cannot clamp a load in place if the air supply drops, so add a locking valve where holding matters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S FAQ
At 0.5 MPa: 402.2 N push and 345.6 N pull. At 0.7 MPa: 563.0 N push and 483.8 N pull. Maximum theoretical output at 1.0 MPa is 82 kgf. Air supply is 0.15-1.0 MPa (22-145 psi), speed spans 30-800 mm/s, the port is 1/8" and the male rod thread is M10x1.25. PT is the standard thread; G and NPT are order options.
Yes - the magnet is a standard part of the MA piston, so CMSG, DMSG and EMSG reed or electronic switches snap onto the barrel with no special-order piston and no surcharge. Because the body is a riveted round tube rather than a tie-rod stack, the switches sit directly on the stainless barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.