Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S
With a 75 mm trim window, this MAJ32X350-75S lets maintenance teams shorten the extend stroke on site without ordering a new cylinder. It runs double-acting on 0.15-1.0 MPa (22-145 psi) air, delivering 402 N forward and 346 N back at 0.5 MPa within a 30-800 mm/s speed band.
The round stainless tube is rolled onto aluminium-alloy covers - a compact riveted build that stays slim over the full 350 mm travel. Halving the 402 N thrust leaves about 20 kg of safe vertical lifting for light gates and arms, while the built-in magnet pairs with DMSG or EMSG switches straight from the box, no add-on piston needed.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S Is Used
Case pusher on carton sealing lines
Pushes sealed cases 350 mm onto a takeaway conveyor; 402 N is enough for stacked carton loads and the 75 mm window absorbs seal-height variation.
Stop-and-release fixture for tube bending
Acts as a re-tunable end stop that trims up to 75 mm for different tube profiles machined on the same bending jig.
Pallet stop arm in paint shop conveyance
Drops a stop arm between pallet passes; de-rated thrust gives about 20 kg of vertical margin, comfortably above the arm weight.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S the Right Cylinder?
Compare the 25 mm bore (245 N at 0.5 MPa) for lighter duty or the 40 mm bore (628 N) when this 32 mm frame is under-rated; both sit in the same MA round-body line. The 75 mm window is an extend-side stop for trimming stroke, not a mid-travel lock - with air off, the piston is free to move. The magnet is built in as standard, so pair with CMSG/DMSG/EMSG switches; choose FA flange or LB foot plus I/Y rod knuckles. On a 350 mm stroke, keep thrust axial and carry side loads on external guides.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S FAQ
This 32 mm bore delivers 402 N extend and 346 N retract at 0.5 MPa, climbing to 563 N and 484 N at 0.7 MPa; theoretical peak is 82 kgf at 1.0 MPa. Stroke is 350 mm with a 75 mm adjustable window, driven at 30-800 mm/s on 0.15-1.0 MPa (22-145 psi) air.
No. The fixed bumper pad only softens the impact at each stroke end; it does not offer tunable deceleration like the cushioned MACJ series. If your cycle needs adjustable end damping, choose MACJ instead of MAJ.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X350-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.