Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S
Where a 50 mm stroke has to finish exactly where the fixture wants it, the MAJ32X50-10S lets an external stop screw pull the extend stroke back by up to 10 mm without touching the air supply. It is double-acting on bore 32: 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, on 0.15-1.0 MPa (22-145 psi).
The magnet is built in as standard on every MA-series cylinder, so position feedback through CMSG, DMSG or EMSG reed switches costs no special piston. The round stainless body rolls directly onto the barrel for a slim sealed riveted build, and the fixed anti-impact pads blunt stroke-end shock. Dividing 402 N by 9.81 gives 41 kgf; halve it and the rod lifts about 20 kg vertically with margin to spare.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S Is Used
Clamp on a drilling fixture
Swings a clamp arm over the 50 mm stroke with 402 N at 0.5 MPa; the 10 mm adjust soaks up fixture-to-fixture variation on the machining line.
Slide gate assist on a powder line
Seats a small gate 50 mm into a dry-material hopper outlet, with the fixed bumper pads killing the slam at each stroke end.
Lid hold-down at a fill station
Presses snap-on lids home over 50 mm of travel and returns on 346 N of pull, while an EMSG switch verifies home position before release.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S the Right Cylinder?
Bore 25 tops out at 245 N at 0.5 MPa and bore 40 at 628 N, so 402 N places this model mid-range: enough muscle for clamping and short pushes without paying for a bigger bore.
The 10 mm trim covers most fixture tolerance, but the stop is an end stop rather than a lock, so under air loss the rod can settle and it should not be trusted to support a raised load. FA flange or LB foot mounting, I or Y knuckle, and standard CMSG, DMSG or EMSG switching complete the package.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S FAQ
Expect 402 N pushing and 346 N pulling at 0.5 MPa; at 0.7 MPa that becomes 563 N and 484 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The bore 32 port is 1/8", and the operating pressure range is 0.15-1.0 MPa (22-145 psi).
FA flange and LB foot are the standard mounts, with I or Y rod knuckles on the nose. As an adjustable model it has no SDB or back-cover code variants. The extend stroke is trimmed by up to 10 mm through the external stop screw, and the standard magnet supports CMSG, DMSG and EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X50-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.