Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke500 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S
Where the last few millimetres decide the cycle, the MAJ32X500-10S gives a tight 10 mm trim window over a full 500 mm stroke: turn the external stop screw in, test the cycle, and lock the exact extend position without swapping spacer blocks. Double-acting, it delivers 402 N push and 346 N pull at 0.5 MPa.
Plan real work at about 241 N of that 0.5 MPa push rather than the full rating - a margin that keeps seals and rod bearings comfortable over millions of cycles. Fixed bumper pads soak up stroke-end shock, and the riveted stainless round body stays compact where bulkier bolted bodies of the same force class would not fit.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S Is Used
Index stop on a rotary dial table
The 10 mm window lets a technician trim the stop so each fixture lands square; 402 N of push at 0.5 MPa seats it against overrun.
Sliding scrap-gate actuator
It drags a chip-conveyor gate across a 500 mm slot, with the 10 mm adjuster setting how far the gate opens for different scrap volumes.
Label-pad press with depth stop
Pressing a brand pad onto carton flaps needs a repeatable depth - the external stop screw locks the extend position after one test cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S the Right Cylinder?
Step down to the MAJ25 for about 245 N at 0.5 MPa or up to the MAJ40 for around 628 N if loads grow. The adjuster shortens the extend stroke only - it never lengthens travel past 500 mm - so order the full travel you need and trim down on site. It is an end stop, not a load-holding lock: a suspended piston will creep if pressure drops. FA flange or LB foot mounting plus I and Y knuckles bolt to most jigs, and the standard magnet reads on CMSG, DMSG or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S FAQ
Push is 402 N at 0.5 MPa and 563 N at 0.7 MPa; pull is 346 N at 0.5 MPa. Theoretical maximum is 82 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) of 40 um filtered air; the speed range is 30-800 mm/s.
No. Every MAJ cylinder ships with a built-in magnet as standard, so CMSG, DMSG or EMSG reed or electronic switches clip straight onto the barrel - no special-order piston is needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.