Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S
A double-acting round-body mini cylinder with an externally trimmed extend stroke: the stop screw on this MAJ32X60-10S shortens the 60 mm stroke by up to 10 mm on site, no disassembly needed. At 0.5 MPa it pushes 402.2 N, roughly 41 kg of force at the rod, enough for light clamping and small-part transfer heads.
The riveted stainless barrel and hard-chrome plated 12 mm rod shrug off washdown splash that swells painted mini bodies, and the fixed bumper pad softens stroke-end knock without any cushion tuning. Plan around 241 N of real work at 0.5 MPa, about 60% of rating, and you keep a comfortable margin on every cycle.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S Is Used
Blister reject pusher
Kicks mis-sealed blisters off a pharmaceutical blister line; the 10 mm trim band lets you match the exact lane width during changeover.
Autosampler tray stop
Parks a 96-well tray at the pick point of a lab autosampler, with the built-in magnet signalling home position to the controller.
Crimp-jig terminal clamp
Clamps wire terminals in an electronics crimping jig, where 402 N at 0.5 MPa holds thin stock without crushing it.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S the Right Cylinder?
Between the 25 mm bore (245.3 N push at 0.5 MPa) and the 40 mm bore (628.3 N), this 32 mm bore sits squarely in the mid-force band. If your load needs a true hold when air drops, add an external locking device - the stop screw is a mechanical extend-stop only, so the rod can still drift on pressure loss.
FA flange or LB foot mounts plus the standard magnet (CMSG / DMSG / EMSG switches click straight on) cover most fixture layouts. At 60 mm stroke rod-bending is not a concern, but keep side load off the rod nose on horizontal pushers.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S FAQ
At 0.5 MPa the MAJ32X60-10S pushes 402.2 N and pulls 345.6 N. Raise pressure to 0.7 MPa and the figures become 563.0 N push and 483.8 N pull, with a theoretical ceiling of 82 kgf at 1.0 MPa. Air supply runs 0.15-1.0 MPa (22-145 psi), filtered to 40 um, through 1/8" ports.
No - the piston magnet is built in as standard on every MA-series cylinder, so CMSG, DMSG or EMSG switches simply clamp onto the stainless barrel without a special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.