Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S
One cylinder, many strokes: the MAJ32X60-40S carries the widest window in the 60 mm group, letting the external stop screw set the extend stroke anywhere from 20 to 60 mm. The 32 mm bore pushes 402.2 N at 0.5 MPa and 563.0 N at 0.7 MPa, so a working plan near 241 N leaves ample headroom.
The round stainless body is riveted onto aluminium covers, keeping the outside diameter slim for tight machine frames. A hard-chrome plated 12 mm rod and grease-storing piston seal hold up through millions of short cycles, while fixed bumper pads take the sting out of stroke ends across a 30-800 mm/s speed range.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S Is Used
Multi-SKU packer stop
Acts as a repositioned end stop for different carton widths on an end-of-line packer, retuned in seconds between SKUs.
Bench-press depth control
Sets riveting depth across part variants on a manual bench press, using the 20 to 60 mm trim range as the depth scale.
Machining nest ejector
Ejects finished aluminium fittings from a CNC-side nest; 402 N at 0.5 MPa clears the part without marring the face.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S the Right Cylinder?
Next sizes: the 25 mm bore gives 245.3 N push at 0.5 MPa for lighter clamps; the 40 mm bore raises this to 628.3 N for heavier press-fit work. The stop screw is a mechanical extend stop, not a brake - if the load must stay parked during a power cut, add a pilot-checked valve or an external lock.
FA flange and LB foot mounts suit fixed fixtures, while I and Y knuckles suit swing arms. CMSG / DMSG / EMSG switches read position straight from the standard built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S FAQ
This 32 mm bore develops 402.2 N push and 345.6 N pull at 0.5 MPa, 563.0 N push and 483.8 N pull at 0.7 MPa, and 82 kgf theoretical at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi), withstands 1.5 MPa (215 psi) proof pressure, and the rod thread is M10x1.25.
FA flange and LB foot are the catalogue mounts, with I and Y rod knuckles available for pivoting links. Adjustable-stroke versions carry no SDB or back-cover accessory code, so plan your brackets around the FA or LB interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.