Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S
Behind its stainless round barrel and riveted aluminium-alloy covers, the MAJ32X60-50S pushes 402 N at 0.5 MPa and pulls 345.6 N, rising to 563 N at 0.7 MPa. It is double acting with an adjustable extend stroke: an external stop screw trims the extend travel anywhere inside the ordered 50 mm window, while fixed bumper pads soften the stroke ends (deceleration only - an adjustable air cushion is the MAC family's job). Operating range is 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
For sizing, plan real work at about 241 N at 0.5 MPa (0.6 of the push rating); that margin keeps a small clamp or press from stalling mid-cycle. The magnet is built in as standard, so CMSG, DMSG or EMSG switches mount straight onto the barrel without a special-order piston. The hard-chrome plated 12 mm rod and grease-storing piston seals also shrug off the washdown mist that quickly pits painted-steel minis.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S Is Used
Bench date-code press
A small pneumatic head stamping date codes onto bottle caps, where the 402 N push at 0.5 MPa is ample and the 50 mm trim dials the die stop to the exact cap height.
Washdown line gate latch
Actuating a reject gate on a food conveyor that gets hosed down daily - the stainless barrel and chrome rod outlast painted minis in the wet zone.
Fixture stopper pin
A retractable stop pin on an assembly fixture, with a CMSG switch on the standard magnet confirming the pin is fully out before the cycle starts.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S the Right Cylinder?
At 60 mm stroke this 32 mm bore suits short clamp-and-return moves; step down to the MAJ25 (245 N push at 0.5 MPa) for lighter clamps or up to the MAJ40 (628 N) for heavier pressing. Ports are 1/8" (PT blank, G or NPT thread), the rod thread is M10x1.25, and mounting is FA flange or LB foot with I and Y rod knuckles available. Remember the stop screw sets a trimmable end position but does not lock the rod - lose air and the piston still drifts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S FAQ
Double acting: 402.2 N push and 345.6 N pull at 0.5 MPa; 563.0 N push and 483.8 N pull at 0.7 MPa; theoretical maximum 82 kgf at 1.0 MPa. Working pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s, air filtered to 40 um.
An external stop screw limits the extend stroke to any length inside the ordered 50 mm window - it shortens travel, it never extends past the rated stroke. Fixed bumper pads cushion the stroke ends, but the screw is a mechanical end stop, not a mid-stroke lock: with air lost the rod still drifts, so do not rely on it to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.