Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 70mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S
With a 30 mm tuning window, the MAJ32X70-30S lets a fixture builder dial the 70 mm extend stroke down to wherever the part actually sits, using only a stop screw on the cover. This 32 mm double-acting bore produces 402 N of push and 346 N of pull at 0.5 MPa, climbing to 563 N push when you run 0.7 MPa.
The round body is rolled from a stainless tube with aluminium covers, and the 12 mm rod carries a hard-chrome plating that resists rust in humid plants. Fixed bumper pads take the sting out of end-of-stroke contact, though they decelerate only - true adjustable cushioning lives in the MACJ series. The magnet is included as standard, so CMSG / DMSG / EMSG sensors snap on for end-position checks, and sizing for real work means allowing about 241 N of usable push at 0.5 MPa, enough to lift roughly 20 kg vertically with a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S Is Used
Indexing stop pin
Deploys a 12 mm pin that halts pallets on an automotive conveyor at a repeatable position set anywhere inside the 30 mm window.
Fixture clamp arm
Clamps steel brackets on a welding cell jig with 402 N at 0.5 MPa, release guaranteed by the 346 N pull stroke.
Carton down-ejector
Pushes filled cartons off a checkweigher belt, landing adjusted to a 30 mm shorter stroke so box corners stay crisp.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S the Right Cylinder?
Between the 25 mm bore (245 N at 0.5 MPa) and the 40 mm bore (628 N at 0.5 MPa), this 32 mm model sits in the mid-thrust band for medium clamps and lifts. The stop is a mechanical extend limit, not a brake - under air loss the rod still moves, so add a valve or external stop where holding matters. Mount with FA flange or LB foot; I and Y knuckles suit rod-side linkages. Ports are 1/8", rod thread M10x1.25, and the standard magnet accepts CMSG / DMSG / EMSG switches without a special-order piston.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S FAQ
Rated at 402 N push / 346 N pull on 0.5 MPa air, and 563 N push / 484 N pull at 0.7 MPa, with a 82 kgf theoretical ceiling at 1.0 MPa. Supply range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and usable speed spans 30-800 mm/s.
No - every MA-series body ships with a magnet already in the piston, so CMSG, DMSG and EMSG reed or solid-state switches clip onto the 32 mm barrel out of the box. The stainless barrel and hard-chrome 12 mm rod also let this cylinder shrug off washdown, while fixed anti-impact pads cushion each stroke end without needing an air-cushion circuit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X70-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.