Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S
A compact double-acting round-body mini cylinder with a 20 mm extend-stroke trim window: turn the external stop screw and the 75 mm stroke lands anywhere from 55 to 75 mm without swapping hardware. At bore 32 it pushes 402 N and pulls 346 N at 0.5 MPa, rising to 563 N at 0.7 MPa. Derating to 60 percent of rating leaves roughly 241 N of usable work at 0.5 MPa, so seals and linkages keep their margin.
The stainless barrel and hard-chrome plated carbon-steel rod shrug off washdown and damp air far better than painted mini cylinders, while the riveted aluminium covers keep the envelope tight. Fixed anti-impact pads soften both stroke ends - these are bumpers only, not adjustable air cushions like the MAC family. A magnet comes built in, so CMSG, DMSG or EMSG switches snap on straight from the box.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S Is Used
Indexing table locking pin
A 402 N push drives a locking pin into a rotary indexing table on a small assembly line, with the 20 mm trim letting the pin seat at a repeatable depth.
Carton flap tucker
On a case packer, the cylinder folds the leading flap of a shipping carton; the stainless barrel copes with corrugate dust and daily wipe-downs.
Lab slide actuation
A benchtop sample slide on an analytical instrument advances 75 mm per cycle, switched mid-travel by a DMSG reed switch clipped to the barrel.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S the Right Cylinder?
Sized between the 25 mm bore (245 N push at 0.5 MPa) and the 40 mm bore (628 N), this 32 mm bore covers mid-range clamping and lifting. The stop screw is a mechanical end stop for extension only - if air leaks away the rod will drift, so it is not a mid-stroke lock or load brake. FA flange and LB foot mountings, plus I and Y rod knuckles, fit most jig plates; the magnet is already in the piston, and non-standard strokes are made to order.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa those figures rise to 563 N and 484 N. The theoretical maximum at 1.0 MPa is 82 kgf. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and speed runs 30-800 mm/s on air filtered to 40 um.
An external stop screw shortens the extend stroke anywhere inside the ordered 20 mm window, so the 75 mm stroke can be set from 55 mm upward on site. It is a mechanical end stop, not a load-holding brake: on air loss the rod still drifts. Fixed bumper pads cushion the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.