Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S
Ten millimetres is all the trim you asked for, and the MAJ32X80-10S delivers it with an external screw - dial the extend stop back up to 10 mm and keep the 402 N push at 0.5 MPa (346 N return) across the whole window. Specified pressure runs 0.15-1.0 MPa (22-145 psi) and speed 30-800 mm/s, so positioning repeatability stays tight at short travels.
Behind the rod is a two-way heterogeneous seal that traps grease in its own grooves, cutting dry-run wear during millions of short strokes - exactly the duty a 10 mm trim window implies. The usual 60 percent rule puts usable work near 241 N at 0.5 MPa, plenty for eject or gauge-clear duties. Choose FA flange, LB foot, or an I / Y rod knuckle to suit the linkage, and rely on the stainless barrel plus hard-chrome rod in splash zones.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S Is Used
Reject finger at a checkweigher
A 10 mm kick clears underweight packs off the belt; the fixed bumper pad keeps the tap quiet at speed.
Eject pin on a small stamping die
402 N at 0.5 MPa pushes finished blanks free of the die; the two-way seal stores grease for dry, high-cycle duty.
Dispensing nozzle kiss stop
Trim the extend stop back up to 10 mm so the nozzle lands at a repeatable standoff above the substrate.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S the Right Cylinder?
The 32 mm bore is the sweet spot here: the 20 mm MAJ manages only 157 N at 0.5 MPa, and the 40 mm at 628 N is overkill for eject-pin duty, while this unit gives 402 N. Bear in mind the adjuster is an extend end stop, not a clamp - with air dumped the rod moves freely, so add a check or locking valve if the load must stay put.
Magnet sensing is built in as standard, so a CMSG switch reports the trimmed stop position straight to your controller. Mount LB or FA; the 12 mm rod handles the compressive 402 N fine at this 80 mm length, but align the load coaxially to avoid bushing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S FAQ
Full figures: 402 N push at 0.5 MPa, 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa (484 N pull), and a theoretical 82 kgf ceiling at 1.0 MPa. Working pressure is 0.15-1.0 MPa (22-145 psi) and speed runs 30-800 mm/s.
No. Every MA-series cylinder, including the MAJ32X80-10S, carries a built-in piston magnet as standard equipment, so CMSG, DMSG and EMSG switches mount directly on the barrel - no special piston or upcharge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.