Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S
Trim the extend stroke down to 20 mm or run the full 95 mm - the -75 window on the MAJ32X95-75S covers that whole range from one external screw, no shims or tube swaps needed. Under air at 0.5 MPa the 32 mm bore yields 402 N forward and 346 N back (563 N and 484 N at 0.7 MPa; 82 kgf theoretical ceiling). The piston seals are a heterogeneous pair that also trap grease in their grooves, stretching service intervals inside the riveted stainless barrel, while the 12 mm rod carries a 20 um hard-chrome skin against scuffing and rust.
Running pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, speed 30-800 mm/s, and fixed bumper pads sit at both stroke ends. The magnet arrives standard, so position feedback via CMSG, DMSG or EMSG switches is a clip-on job. One caution: the adjuster sets where the rod stops, it does not hold the load if air fails - support the mass separately. As a working figure, count on about 241 N of usable push at 0.5 MPa, roughly a 20 kg vertical lift with a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S Is Used
Fill-nozzle drop on a syrup line
The 20-95 mm trim range matches different bottle formats, and 402 N at 0.5 MPa drives each nozzle home without hammering the neck.
Scrap chute diverter at a press shop
563 N at 0.7 MPa swings a heavy chute flap through its linkage; the stainless barrel tolerates the oily, misty air around forming presses.
Guide-rail tensioner on packaging machines
A magnet standard in the piston feeds a CMSG switch so the PLC verifies rail-tension position before film threading starts.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S the Right Cylinder?
Weigh it against the 25 mm bore (245 N push at 0.5 MPa) and the 40 mm bore (628 N): 32 mm is the balanced pick when 400 N-class force and a 95 mm reach both matter. Ports are 1/8" for this bore, and mounting runs to FA flange or LB foot, with I and Y knuckles available for linkages (no SDB variant on adjustable builds). For a 95 mm overhang, support the load externally or keep thrust axial so the rod bushing is not side-loaded. Set the stop screw for the shortest stroke each product actually needs - shorter travel also trims cycle time.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S FAQ
At 0.5 MPa: 402 N push, 346 N pull. At 0.7 MPa: 563 N push, 484 N pull. Maximum theoretical output is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi), proof is 1.5 MPa (215 psi), and speed runs 30-800 mm/s.
The barrel is stainless steel rolled tight against aluminium-alloy covers, and the 12 mm rod is carbon steel with a 20 um hard-chrome plate. That pair resists mild corrosion and rinse-down far better than painted mini cylinders, though it is not a certified food-grade unit - confirm any hygiene compliance separately.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X95-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.