Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø40mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ40 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S
For a 10 mm push with room to fine-tune, the MAJ40X10-10S covers it: a double-acting bore 40 mini cylinder whose external stop screw trims the extend stroke anywhere inside the ordered 10 mm window. At 0.5 MPa the barrel develops 628.3 N of push, so plan on roughly 377 N of real work once you keep a margin - about 32 kg lifted vertically at 2:1. A piston magnet comes standard, so CMSG, DMSG or EMSG switches clamp straight on.
Build quality is the quiet advantage here. The stainless-steel round barrel with its hard-chrome plated 16 mm rod (M12x1.25 male thread) resists washdown and mild corrosion far better than painted minis, and the aluminium covers are rolled on for a compact, sealed body. Fixed anti-impact pads soften each stroke end; ports are 1/8". Pressure runs 0.15-1.0 MPa (22-145 psi) with speed from 30-800 mm/s.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S Is Used
Indexing pin on a rotary table
A 10 mm motion at 628.3 N seats an indexing pin into fixture holes on a rotary indexing table; the 10 mm window lets you fine-set the seat depth without shims.
Reject pusher on a vial line
The short throw flicks off-spec vials off a pharmaceutical conveyor, and the fixed bumper pads stop each kick without hammering the guide rail.
Latch on a leak-test fixture
Pull a spring latch closed on a leak-test rig; 527.8 N of retract force at 0.5 MPa keeps it seated for the full test cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S the Right Cylinder?
Bore 40 is the strongest in the MA range - step down to a 32 mm MAJ for 402.2 N at 0.5 MPa if the load is lighter. Because the stop screw only limits the extend stroke, it is an end stop, not a mid-stroke lock: on air loss the piston will drift, so add a valve or clamp where the rod must be held. Mount with an FA flange or LB foot and add I or Y rod knuckles when the load pivots; SDB is not offered on this adjustable series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S FAQ
At 0.5 MPa: 628.3 N push and 527.8 N pull. At 0.7 MPa: 879.6 N push and 738.9 N pull. Theoretical maximum at 1.0 MPa is 128.1 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof at 1.5 MPa (215 psi), and speed spans 30-800 mm/s.
No. The stop screw sets where the extend stroke ends within the ordered 10 mm window; the fixed bumper pads only soften the arrival. Adjustable air cushioning belongs to the MACJ family, not this model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.