Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø40mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ40 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S
A full 100 mm of on-site trim - the widest window in the MAJ adjustable range - makes the MAJ40X175-100S the flexible one of the family. This double-acting, round-body mini cylinder runs a 40 mm bore over a 175 mm stroke; an external stop screw shortens the extend stroke anywhere within that 100 mm band. At 0.5 MPa it pushes 628 N and pulls 528 N, so budget about 377 N for steady work at 0.15-1.0 MPa (22-145 psi).
Construction stays true to the MA platform: stainless barrel, 16 mm hard-chrome rod, aluminium covers rolled onto the tube, and fixed bumper pads that soften landings without acting as an adjustable cushion. The magnet is built in as standard - CMSG, DMSG or EMSG switches snap on for end-of-stroke signalling. Operating envelope: speed 30-800 mm/s, air filtered to 40 um, -20 to +70 C, proof pressure 1.5 MPa (215 psi).
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S Is Used
Case sealer flap tuckers
One cylinder serves multiple carton heights - retune the 100 mm window between SKUs instead of swapping hardware; 628 N tucks stiff flaps.
Tote diverters in distribution sortation
Rinsed-down or humid warehouse air is no problem for the stainless barrel; 880 N at 0.7 MPa diverts loaded totes at speed.
Clamping fixtures on welding jigs
The external stop sets clamp position per fixture variant, and 528 N of pull releases the arm cleanly each cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S the Right Cylinder?
Sizing check: the 32 mm bore delivers 402 N push at 0.5 MPa, so drop a size only if roughly 240 N of working force suffices; otherwise 40 mm - the largest MAJ bore - is right. The 100 mm window fits machines whose stop position changes between product runs. Keep in mind the adjuster trims the extend stroke mechanically and is not a load-holding brake; the rod moves under gravity or residual pressure if air is lost. FA flange or LB foot mounting, I/Y knuckles available; at 175 mm of stroke, support side loads with external guides to protect the 16 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S FAQ
Extend force 628.3 N and retract 527.8 N at 0.5 MPa; 879.6 N and 738.9 N respectively at 0.7 MPa; 128.1 kgf theoretical maximum at 1.0 MPa. Operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s.
It does not. The MAJ carries fixed anti-impact pads that decelerate the piston at the set end position - they cannot be tuned like the adjustable cushions on the MACJ family. For tunable cushioning plus stroke adjustment, move to MACJ; for this model, the 100 mm stop screw plus bumper pads cover most positional tuning needs.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.