Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø40mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ40 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S
With a 40 mm wide trim window, the MAJ40X175-40S gives machine builders the most on-site latitude in this batch: the extend stroke can sit anywhere from 135 mm up to the full 175 mm. Force output is 628 N extending and 528 N retracting at 0.5 MPa, topping out near 880 N at 0.7 MPa. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s.
The body is a rolled stainless tube, not a tie-rod stack, so the compact round profile slips between guards where bulkier minis will not. Vertical duty math: 628 N balances roughly 64 kg, so with a 2:1 margin it lifts about 32 kg vertically. Keep side loads off the 16 mm rod and guide them externally on the long 175 mm travel.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S Is Used
Scraper blade on a food line
A stainless-bodied wiper sweeping dough or residue from a belt, with a washdown-friendly barrel and a 40 mm-tuned wiping position.
Small die ejector
Ejecting pressed parts from a compact die where 628 N at 0.5 MPa kicks the part clear and the trimmed stop protects the die face.
Tray transfer pusher
Shifting loaded trays sideways between conveyor lanes with the extend end position set anywhere inside the 40 mm window.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S the Right Cylinder?
Below it, a 32 mm bore yields 402 N at 0.5 MPa; above, nothing larger exists in the MA range, so 40 mm at 628 N is the ceiling for this mini family. Note the stop screw is an extend-side end stop only and will not hold a load if supply pressure drops. Pick FA flange or LB foot mounting; I and Y knuckles suit rod-end linkages. Because the magnet is built in as standard, CMSG / DMSG / EMSG switches need no option code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S FAQ
Yes: 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, and a theoretical peak of 128.1 kgf at 1.0 MPa. Air connection is 1/8"; rod thread is M12x1.25.
The rolled stainless barrel and hard-chrome plated rod shrug off condensation, light washdown and outdoor exposure that flake painted mini cylinders, while the riveted round construction keeps the footprint narrow in tight frames.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X175-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.