Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ40 mm
- Stroke500 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S
Fine-positioning is the brief here: a full 500 mm sweep paired with a narrow 10 mm stop-screw window, so the extend stroke lands exactly where the process repeats every cycle. This 40 mm bore delivers 628 N at 0.5 MPa (128.1 kgf theoretical peak at 1.0 MPa) on a hard-chrome 16 mm rod inside a riveted stainless tube.
Reserve about 377 N for the actual job at 0.5 MPa, since sizing to the raw rating is how minis get overloaded. The rolled stainless barrel shrugs off coolant mist in machine shops, the standard magnet feeds CMSG / DMSG / EMSG switches for position feedback, and both covers carry a plain 1/8" port.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S Is Used
Long-feed cut-off station
A 500 mm push carries the saw carriage across aluminium bar, and the 10 mm window sets the exact final depth of each cut.
Hopper metering gate
A slide gate meters plastic pellets from a silo onto a belt; the stop screw fixes the open position so every dose stays equal.
Peel-test traverse
A 500 mm crosshead traverse on an adhesive peel rig, where the trim window ends travel precisely at the specimen mark.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S the Right Cylinder?
Work down as well as up: bore 32 offers 402 N at 0.5 MPa and often wins on price when the load allows, while this 40 mm bore is the MA series ceiling, so beyond 628 N look at MACJ with its adjustable cushion. Over a 500 mm span, carry side load on external guides rather than on the rod. Mount via FA flange or LB foot; the rod thread is M12x1.25 for tooling attachment. Note the 10 mm adjuster is an extend-side stop only, so a dropped supply still lets the piston move.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S FAQ
Rated 628.3 N to extend and 527.8 N to retract at 0.5 MPa; 879.6 N extend and 738.9 N retract at 0.7 MPa; 128.1 kgf theoretical peak at 1.0 MPa. Pressure range 0.15-1.0 MPa (22-145 psi) and speed range 30-800 mm/s.
Choose FA flange or LB foot mounting, with I and Y rod knuckles available for pivoting loads. The rod end is M12x1.25 and both air ports are 1/8", which keeps standard fittings in play.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X500-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.