Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ40 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S
Dial in the last 10 mm of travel: on this 60 mm MAJ the external stop screw lets service crews set the extend stroke anywhere between 50 and 60 mm without swapping cylinders. Push force is 628 N at 0.5 MPa, pull 528 N, rising to 880 N push at 0.7 MPa - a 128 kgf theoretical peak at 1.0 MPa. Keep continuous work near 377 N and the bore never strains.
Instead of tie-rod plates, a stainless round barrel is rolled together with aluminium covers and a stainless block, sealing a 16 mm hard-chrome rod inside a slim shell that shrugs off mild corrosion and rinse-down zones. The bumper pad is fixed - it only softens the stroke end, not an adjustable cushion like the MACJ offers - and the built-in magnet accepts CMSG / DMSG / EMSG switches with no extra-order piston.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S Is Used
Fine-trim stop on an electronics test fixture
Sets probe descend depth between 50 and 60 mm, pressing with about 377 N of usable force at 0.5 MPa without recalculating the station at each changeover.
Bottle-gate actuator on a bottling skid
The rinse-tolerant stainless barrel and chrome rod sit beside washdown spray while a DMSG switch confirms gate position every cycle.
Tooling clamp on an injection-mould jig
The 10 mm window lets machinists shave stroke after tooling changes; 528 N of pull retracts the clamp quickly between shots.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S the Right Cylinder?
Between the 32 mm MAJ (402 N push at 0.5 MPa) and this 40 mm top-of-range bore at 628 N, the MA ladder ends here - 40 mm is the largest bore in the series. Use FA flange or LB foot plus I and Y knuckles; the adjustable design omits SDB and back-cover codes. The trim stop sets the end of stroke only; on sudden air loss the piston still coasts, so it will not park a suspended load. Ports are 1/8" and speed spans 30-800 mm/s across 0.15-1.0 MPa (22-145 psi).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S FAQ
Push 628 N, pull 528 N at 0.5 MPa; push 880 N and pull 739 N at 0.7 MPa; theoretical peak 128 kgf at 1.0 MPa. The extend stroke adjusts within the 10 mm window (50-60 mm effective). Fluid is filtered air at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-800 mm/s, temperature -20 to +70 C.
No. Every MA cylinder ships with its magnet already fitted, so CMSG, DMSG and EMSG sensors clip onto the stainless barrel with no upcharge. Mount via FA flange or LB foot, or add I / Y rod knuckles; adjustable versions drop the SDB option and back-cover code. The 1/8" port suits this bore, and the male rod thread is M12x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ40X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.