This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X750CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X750CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X750CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X750CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM
The AirTAC MAL32X750CM is a discontinued, double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 402 N of push force at 0.5 MPa, it features a 32 mm bore, a 750 mm stroke, and a CM round-end back cover. Because this stroke exceeds the 500 mm standard limit, it was produced as a non-standard, made-to-order configuration. The exact drop-in replacement is the MBL32X750CM, which matches the original bore, stroke, output force, G1/8 port, and mounting interface.
The legacy MAL body used threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body for equally robust performance. This specific SKU lacks a built-in magnet, meaning it cannot support position sensing. The piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod features 20 um hard-chrome plating to resist wear. End-of-stroke deceleration is handled by a fixed rubber bumper, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X750CM |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X750CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X750CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×750 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM Is Used
PCB Conveyor Routing
Drives a routing head along a 750 mm path on a printed circuit board conveyor, utilizing the 402 N push force at 0.5 MPa to cleanly sever connection tabs.
Textile Beam Indexing
Indexes heavy textile beams across a 750 mm stroke in automated looms, where the CM round-end back cover accommodates slight angular misalignment during transfer.
Carton Push-off Arm
Pushes packaged cartons off a roller line in a packaging cell, relying on the 346 N pull force at 0.5 MPa to retract the extended 12 mm rod through the 750 mm cycle.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM with MBL32X750CM
To replace the MAL32X750CM, order the MBL32X750CM. Confirm your 32 mm bore, 750 mm made-to-order stroke, G1/8 port, and CM round-end back cover. Because this SKU has no -S magnet, it cannot accept a position sensor; if you require rod detection, the MBL equivalent will require the -S option and must use modern CMSG, DMSG, or EMSG switches instead of the older CS1-M / DS1-M sensors. If you need adjustable air cushioning at the stroke ends, step up to the MBLC variant, as the MAL only offers a fixed rubber bumper.
For sizing flexibility, stepping down to a 25 mm bore reduces push force to 245 N at 0.5 MPa, while stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. At 750 mm of travel, the 12 mm rod is highly susceptible to bending under lateral stress; you must use an external guide rail to support the load. A plain bumper does not hold position if air pressure drops, so add an external rod lock for vertical or gravity-loaded applications.
Upgrade checklist
- ✓ Order the MBL32X750CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X750CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM FAQ
Yes, the MAL32X750CM is discontinued. The exact drop-in replacement is the MBL32X750CM, offering the same 32 mm bore, 750 mm stroke, G1/8 port, and CM round-end mounting. The MBL features a riveted rolling-packed body instead of the older threaded covers, but maintains identical performance.
The 32 mm bore delivers 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Note that the 750 mm stroke is a non-standard made-to-order length exceeding the 500 mm standard maximum.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X750CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750CM → MBL32X750CM)
Tell us the quantity and destination — we quote the drop-in MBL32X750CM replacement with price, stock and lead time, usually within 7-8 hours.