This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X75SCAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X75SCAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X75SCAH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X75SCAH
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH
The AirTAC MAL32X75SCAH is a discontinued double-acting mini round cylinder with a 32mm bore and 75mm stroke. It delivers 402N push and 346N pull force at 0.5MPa. AirTAC replaced this legacy unit with the MBL32X75SCAH, a drop-in alternative matching the exact bore, stroke, output force, G1/8 port, and CA pivot mounting.
This SKU includes a built-in magnet (-S) for position sensing, originally paired with CS1-M or DS1-M switches. The MBL successor upgrades you to CMSG, DMSG, or EMSG sensors. Unlike the threaded covers on this MAL, the replacement uses a riveted rolling-packed body. It retains the fixed rubber bumper and carbon-steel rod with 20um hard chrome.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X75SCAH |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X75SCAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X75SCAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH Is Used
Packaging Conveyor Diverter
Uses the 402N push force at 0.5MPa to reliably shove small cartons off a main packaging belt, with the CA pivot absorbing the slight arcing motion of the diverter arm.
PCB Test Socket Clamping
Provides 346N pull force to retract a testing probe holder, fitting the compact aluminum body into tight electronics cell testing machinery.
Textile Yarn Guide
Shifts a thread guide 75mm across a spinning beam, relying on the self-lubricating front-cover bearing to survive high-speed continuous operation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH with MBL32X75SCAH
To replace the MAL32X75SCAH, order the MBL32X75SCAH. Confirm the 32mm bore, 75mm stroke, G1/8 port, and PT thread are retained. This model includes a CA pivot back cover, which swings on a pin to absorb arcing rod loads. Because it has the -S magnet, plan to upgrade your CS1-M/DS1-M switches to the CMSG/DMSG/EMSG family. If you need adjustable cushioning instead of the fixed rubber bumper, step up to the MBLC variant.
For sizing flexibility, stepping down to the 25mm bore drops force to 245N push at 0.5MPa, while stepping up to the 40mm bore increases it to 628N. Note that a plain bumper does not hold loads when air is lost; the rod will drift. For a 75mm stroke, side-load tolerance is moderate, but the Ø12mm rod means an external guide is recommended for heavy lateral forces.
Upgrade checklist
- ✓ Order the MBL32X75SCAH (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X75SCAH instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH FAQ
Yes, the MAL32X75SCAH is discontinued. The exact drop-in replacement is the MBL32X75SCAH, which matches the 32mm bore, 75mm stroke, CA pivot cover, and G1/8 port. You simply order the MBL equivalent.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa push is 563N, with a maximum theoretical force of 82kgf at 1.0MPa. The -S magnet works with older CS1-M/DS1-M switches; the MBL replacement requires CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X75SCAH replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75SCAH → MBL32X75SCAH)
Tell us the quantity and destination — we quote the drop-in MBL32X75SCAH replacement with price, stock and lead time, usually within 7-8 hours.