This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X85CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X85CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X85CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke85 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X85CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM
The AirTAC MAL32X85CM is a discontinued double-acting aluminum mini round cylinder engineered to deliver 402 N of push force at 0.5 MPa. It features a 32 mm bore, an 85 mm stroke, and a CM round-end back cover. AirTAC ended the MAL series and replaced it with the MBL32X85CM, a drop-in alternative retaining the exact same bore, stroke, output force, G1/8 port, and mounting interface. Buyers should order the MBL equivalent for current production.
This legacy unit relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. Because this specific SKU lacks the -S magnet option, it cannot support a position sensor. During the upgrade, the original MAL threaded front and back covers were replaced by a riveted rolling-packed body on the MBL line. Internally, a heterogeneous two-way seal retains grease while a self-lubricating bearing guides the 12 mm carbon-steel rod, which is plated with 20 um of hard chrome for wear resistance.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X85CM |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X85CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X85CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×85 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM Is Used
Textile Loom Weft Feeder
Cycles the weft guide arm in a narrow textile loom, utilizing the 402 N push force to positively shift yarn carriers without stalling.
Carton Flap Folder
Folds minor flaps on small packaging cartons, where the 85 mm stroke provides fast actuation and the CM round-end absorbs minor pivot misalignment.
PCB Router Ejector
Kicks separated printed circuit boards out of a routing machine, leveraging the 12 mm hard-chrome rod to resist repetitive impact wear.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM with MBL32X85CM
To replace the MAL32X85CM, order the MBL32X85CM and verify the 32 mm bore, 85 mm stroke, PT thread, and CM round-end back cover. If your application requires position feedback, note that this non-S SKU cannot mount a sensor; you must upgrade to an MBL32X85CMS and switch from the legacy CS1-M/DS1-M switches to the current CMSG/DMSG/EMSG family. If a cushion is needed, step up to the MBLC variant for adjustable air cushioning.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. A plain rubber bumper is not a lock; the rod will drift if air pressure drops, so use an external rod lock for suspended loads. At 85 mm, side-load risk is minimal, but always ensure rigid mounting to prevent rod binding.
Upgrade checklist
- ✓ Order the MBL32X85CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X85CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM FAQ
Yes, the MAL32X85CM is discontinued. The exact drop-in replacement is the MBL32X85CM, which matches the 32 mm bore, 85 mm stroke, 402 N force, G1/8 port, and CM round-end mounting. You can order the MBL32X85CM as a direct substitute.
The 32 mm bore generates 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Because this SKU lacks the -S magnet, it cannot accept a position sensor; adding feedback requires moving to an MBL-S model with CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X85CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85CM → MBL32X85CM)
Tell us the quantity and destination — we quote the drop-in MBL32X85CM replacement with price, stock and lead time, usually within 7-8 hours.