This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X1050SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X1050SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X1050SCM (Discontinued) → MBL40X1050SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 1050mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X1050SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X1050SCM is a discontinued double-acting aluminum mini round cylinder configured with a special made-to-order 1050 mm stroke that exceeds the 500 mm standard limit. Delivering 628 N of push force at 0.5 MPa, it utilizes a G1/4 port and a 16 mm carbon-steel rod with 20 um hard-chrome plating. The direct drop-in replacement is the MBL40X1050SCM, matching the exact bore, stroke, output force, port size, and CM round-end back cover.
This legacy SKU features a built-in -S magnet for position detection and a CM round-end rear cover. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body. Furthermore, the MAL -S magnet interfaces with older CS1-M or DS1-M reed switches, while the MBL successor transitions to the current CMSG, DMSG, or EMSG sensor families.
| Model | AirTAC MAL40X1050SCM (Discontinued) → MBL40X1050SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X1050SCM |
| Bore size | Ø40 mm |
| Stroke | 1050 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X1050SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X1050SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×1050 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives a 1050 mm vertical lift cycle on a packaging line, utilizing the 628 N push force at 0.5 MPa to raise lightweight product trays between conveyor tiers.
Actuates a long horizontal positioning stroke for a textile winding beam, relying on the CM round-end cover to accommodate minor angular misalignments during the transfer.
Extracts tote bins from high-density shelving using the extended 1050 mm reach, requiring the -S magnet and CS1-M sensors to confirm the fully retracted home position.
To replace this discontinued cylinder, order the MBL40X1050SCM. Confirm the 40 mm bore, 1050 mm non-standard stroke, G1/4 port, PT thread form, CM round-end back cover, and the magnet requirement. When upgrading, note that your existing CS1-M or DS1-M sensors will need to be swapped for CMSG, DMSG, or EMSG switches to match the new MBL body. If adjustable end-of-stroke cushioning is required for this long stroke, the fixed rubber bumper on this legacy model cannot provide it; you must step up to the current MBLC variant.
For sizing flexibility, stepping down to the 32 mm bore drops the 0.5 MPa push force to 402 N, while no larger bore exists in this mini series. Because the stroke is 1050 mm, the 16 mm rod is highly susceptible to bending under side loads; an external guide rail or a pivot mount is strongly recommended to prevent rod damage. The rubber bumper only softens the stroke end and does not hold the load if air pressure drops—a separate pilot-operated check valve is required for position holding.
Upgrade checklist
Yes, the MAL40X1050SCM is discontinued. The exact drop-in replacement is the MBL40X1050SCM, which matches the 40 mm bore, 1050 mm stroke, G1/4 port, and CM round-end cover. The MBL uses a riveted rolling-packed body instead of threaded covers, and the -S magnet requires upgrading from the old CS1-M / DS1-M switches to the CMSG / DMSG / EMSG sensor family.
The 40 mm bore generates a push force of 628 N and a pull force of 528 N at 0.5 MPa, increasing to 880 N push at 0.7 MPa, with a theoretical maximum of 128 kgf at 1.0 MPa. The standard stroke limit is 500 mm, but this 1050 mm configuration is a non-standard, made-to-order option that requires the MBL replacement to be manufactured to specification.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X1050SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X1050SCM replacement with price, stock and lead time, usually within 7-8 hours.