This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X10CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X10CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X10CM (Discontinued) -> MBL40X10CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 10mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X10CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X10CM is a discontinued double-acting aluminum mini round cylinder with a 40 mm bore and 10 mm stroke. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa. AirTAC replaced this legacy unit with the MBL40X10CM, a drop-in alternative that matches the original bore, stroke, output force, G1/4 port, and CM round-end back cover. You can swap them directly without altering your mechanical layout.
This specific SKU lacks a built-in magnet, so it cannot support position sensing. The original MAL body uses threaded front and back covers, whereas the upgraded MBL features a riveted rolling-packed body for improved structural integrity. Both versions rely on a fixed rubber bumper to soften end-of-stroke impacts, though the current MBLC variant adds an adjustable air cushion if you need finer deceleration. Furthermore, a standard cylinder cannot hold a load if air pressure drops; the rod will drift, requiring an external pilot-operated check valve for position holding.
| Model | AirTAC MAL40X10CM (Discontinued) -> MBL40X10CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X10CM |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X10CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X10CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Ideal for securing heavy machined metal blocks in CNC fixtures, utilizing the 628 N push force at 0.5 MPa within a tight 10 mm travel distance.
Acts as a compact diverter arm on packaging lines, rapidly extending 10 mm to push cartons onto a secondary track using 880 N at 0.7 MPa.
Functions as a rigid stop for light pallets on assembly conveyors, where the CM round-end back cover provides a smooth contact surface for arriving goods.
To replace the MAL40X10CM, order the MBL40X10CM, ensuring you keep the CM round-end back cover and the default PT tapered port thread. Because this model has no -S magnet, it cannot accept a sensor; if you need position feedback, step up to an MBL40X10CMS and use the current CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M. If your application requires precise end-of-stroke damping rather than a fixed rubber bumper, specify the MBLC40X10CM for its adjustable air cushion.
For sizing alternatives, stepping down to a 32 mm bore drops the push force to 402 N at 0.5 MPa, while stepping up to a 50 mm bore (outside the MAL/MBL mini range) yields higher thrust. Since this is a 10 mm stroke, side-load risks are minimal, but the 16 mm carbon-steel rod with 20 um hard chrome plating still requires alignment to avoid premature wear of the self-lubricating front-cover bearing guide.
Upgrade checklist
Yes, the MAL40X10CM is discontinued. The exact drop-in replacement is the MBL40X10CM, which matches the 40 mm bore, 10 mm stroke, 628 N push force, G1/4 port, and CM round-end mounting. The MBL upgrades the body from threaded covers to a riveted rolling-packed design.
At 0.5 MPa, it provides 628 N push and 528 N pull force; at 0.7 MPa, it pushes 880 N, with a theoretical maximum of 128 kgf at 1.0 MPa. This specific SKU has no -S magnet, meaning it cannot accept a position sensor; the upgraded MBL-S versions use CMSG, DMSG, or EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X10CM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X10CM replacement with price, stock and lead time, usually within 7-8 hours.