This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X110SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X110SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X110SCM (Discontinued) → MBL40X110SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X110SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X110SCM is a discontinued double-acting aluminum mini round cylinder. It delivers 628 N push and 528 N pull at 0.5 MPa, utilizing a 40 mm bore and 110 mm stroke. The exact drop-in replacement is the MBL40X110SCM, matching the original force, G1/4 port, and mounting footprint exactly.
This SKU features a round-end CM back cover and a built-in -S magnet. The legacy MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Furthermore, the -S magnet on this MAL works with older CS1-M / DS1-M switches, while the MBL replacement requires current CMSG / DMSG / EMSG sensors.
| Model | AirTAC MAL40X110SCM (Discontinued) → MBL40X110SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X110SCM |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X110SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X110SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×110 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Uses the 880 N push force at 0.7 MPa to knock small stamped metal parts out of a die, with the 110 mm stroke clearing the press bed.
Relies on the CM round-end back cover to pivot smoothly while deflecting cartons on a 40 mm bore compact routing gate.
Leverages the 528 N pull force at 0.5 MPa to retract a heavy stop gate, holding pallets securely at a conveyor workstation.
To replace the MAL40X110SCM, order the MBL40X110SCM. Verify your 40 mm bore, 110 mm stroke, G1/4 port, and PT thread form. Retain the CM round-end back cover and any external mounting brackets. Because this SKU includes the -S magnet, you must upgrade your position sensing from the old CS1-M / DS1-M switches to the modern CMSG / DMSG / EMSG family.
If sizing force, step down to a 32 mm bore for 402 N push at 0.5 MPa, or if 628 N is insufficient, step up to a 50 mm profile cylinder. Note that the MAL uses a fixed rubber bumper; if your application needs adjustable end-of-stroke cushioning, specify the MBLC variant on the current line. A plain cylinder does not hold position if air pressure drops, so fit an external rod lock for suspended loads.
Upgrade checklist
Yes, the MAL40X110SCM is discontinued. The exact drop-in replacement is the MBL40X110SCM, offering the same 40 mm bore, 110 mm stroke, 628 N force, and G1/4 port. The MBL uses a riveted body instead of threaded covers, and if you use the -S magnet, you must switch from CS1-M / DS1-M to CMSG / DMSG / EMSG sensors.
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa the push force is 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X110SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X110SCM replacement with price, stock and lead time, usually within 7-8 hours.