This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X130CAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X130CAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X130CAH (Discontinued) → MBL40X130CAH is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 130mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X130CAH, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X130CAH is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 130mm stroke. It delivers 628N of push force at 0.5MPa and 880N at 0.7MPa, utilizing a robust Ø16mm carbon-steel rod with 20um hard-chrome plating. Because this legacy series is end-of-life, the direct drop-in replacement is the MBL40X130CAH, which matches the exact bore, stroke, 128kgf maximum output, G1/4 port, and CA pivot mounting.
This specific SKU features a CA pivot back cover designed to swing on a pin for arcing loads, contrasting with rigid flat-end U models. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for faster assembly. Note that this configuration lacks a -S magnet, meaning it cannot support any position sensor. Additionally, the fixed rubber bumper softens end-of-stroke impacts but does not lock the rod, while the current-line MBLC offers an adjustable air cushion if energy absorption is insufficient.
| Model | AirTAC MAL40X130CAH (Discontinued) → MBL40X130CAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X130CAH |
| Bore size | Ø40 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X130CAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X130CAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives a 130mm swing arm to reroute filled cardboard cartons on a packaging line, utilizing the 628N push force and CA pivot clevis to accommodate the arcing motion.
Actuates a fabric take-up roller assembly in a compact textile machine, where the 880N force at 0.7MPa reliably pulls the woven material through the frame.
Pries open bottom flaps of erect corrugated boxes prior to palletizing, fitting into tight conveyor clearances where the 40mm aluminum body provides high force without bulk.
To replace the MAL40X130CAH, order the MBL40X130CAH and verify your CA pivot pin bore. Confirm the G1/4 port and PT tapered thread form match your existing fittings. Because this SKU lacks an -S magnet, it cannot accept a position sensor; if you need end-of-stroke detection on the new MBL, add the S suffix and switch from the legacy CS1-M/DS1-M switches to the current CMSG/DMSG/EMSG family. If your load drifts when air is lost, note that the rubber bumper is not a lock—you will need an external rod lock or pilot-operated check valve.
For sizing flexibility, you can step down to the 32mm bore (402N push at 0.5MPa) if your load is lighter, or step up to a larger ISO 15552 profile cylinder if your application exceeds 128kgf. At 130mm of stroke, side-load bending is a moderate risk; ensure the CA clevis is free to articulate or add an external guide to protect the 16mm rod. If end-of-travel shock becomes an issue, upgrade to the MBLC variant for an adjustable air cushion.
Upgrade checklist
Yes, the MAL40X130CAH is discontinued. The exact drop-in replacement is the MBL40X130CAH, which offers the same 40mm bore, 130mm stroke, CA pivot mounting, G1/4 port, and 128kgf maximum force. The new MBL uses a riveted rolling-packed body instead of threaded covers, and if you ever need an adjustable cushion, the MBLC variant provides that feature.
This 40mm bore cylinder delivers 628N push and 528N pull at 0.5MPa, 880N push at 0.7MPa, and a maximum theoretical force of 128kgf at 1.0MPa. Because this specific SKU does not include a -S magnet, it cannot accept a position sensor; legacy MAL sensors were CS1-M/DS1-M, while the MBL replacement uses CMSG/DMSG/EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X130CAH replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X130CAH replacement with price, stock and lead time, usually within 7-8 hours.