This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X15SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X15SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X15SCM (Discontinued) -> MBL40X15SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 15mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X15SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X15SCM is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 15mm stroke. It delivers a robust 628 N push and 528 N pull at 0.5 MPa, utilizing a G1/4 port and a 16mm carbon-steel rod with 20 um hard chrome plating. The exact drop-in replacement is the MBL40X15SCM, matching the bore, stroke, output force, port, and mounting. This SKU includes a built-in magnet (-S) and a CM round-end back cover.
Two structural differences define the upgrade path. First, the legacy MAL uses threaded front and back covers on the barrel, whereas the modern MBL employs a riveted rolling-packed body for enhanced structural integrity. Second, the -S magnet on this MAL operates with the older CS1-M and DS1-M reed switches; moving to the MBL equivalent requires updating to the current CMSG, DMSG, or EMSG sensor family.
| Model | AirTAC MAL40X15SCM (Discontinued) -> MBL40X15SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X15SCM |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X15SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X15SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×15 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of push force at 0.5 MPa to eject small plastic parts from mold cavities, using the short 15mm stroke for rapid cycling.
Actuates a short mechanical arm to fold packaging flaps on a filling line, where the 40mm bore delivers decisive force without overshooting the stroke.
Drives locating pins into soft jigs or workpieces, relying on the self-lubricating front-cover bearing guide to maintain alignment over thousands of hits.
To replace the MAL40X15SCM, order the MBL40X15SCM. Confirm the 40mm bore, 15mm stroke, G1/4 port, PT tapered thread, CM round-end back cover, and the -S magnet. Because this is a short 15mm stroke, side-load bending is negligible, but note the fixed rubber bumper cannot hold the load if air pressure drops. If end-of-stroke cushioning is critical, step up to the current MBLC which offers an adjustable air cushion that the MAL lacked.
For sizing flexibility, you can step down to the 32mm bore neighbor (delivering 402 N push at 0.5 MPa) if 628 N is excessive, or step up to a larger ISO 15552 profile cylinder if your application outgrows the mini round format. The CM round-end back cover on this unit accommodates slight angular misalignment better than a flat U cover, making it ideal for pivoting assemblies.
Upgrade checklist
Yes, the MAL40X15SCM is discontinued. The exact drop-in replacement is the MBL40X15SCM, which matches the 40mm bore, 15mm stroke, G1/4 port, CM round-end cover, and mounting. You must update your sensors, as the MAL -S magnet works with CS1-M/DS1-M switches, while the MBL uses CMSG/DMSG/EMSG sensors.
The 40mm bore generates a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. It uses a 16mm carbon-steel rod with an M12x1.25 rod-end thread and a fixed rubber bumper.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X15SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X15SCM replacement with price, stock and lead time, usually within 7-8 hours.