Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA
Tuned for high-speed actuation, the AirTAC MFC32X110CA uses a needle-set variable air cushion at both ends to soak up end-of-stroke shock, protecting payloads far better than a fixed bumper. This JIS-standard round-body mini cylinder pairs a SUS304 stainless barrel with riveted aluminium covers for solid mild-corrosion resistance, and its 110 mm stroke is driven by a 32 mm bore yielding 402.2 N of push force at 0.5 MPa.
Featuring a CA rear pivot cover and a 1/4" port, the double-acting piston relies on a two-way oil-retaining seal for smooth travel. The compact riveted body is physically shorter than an ISO 6432 cylinder of the same bore and stroke, saving valuable mounting length. For sizing, expect a safe working load of roughly 241 N, meaning it lifts about 20.5 kg vertically with a 2:1 margin. Note that this specific SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA Is Used
Package Diverting
Handles 20 kg cartons at high cycle rates on a sorting line, using the needle-set cushion to silently absorb the 110 mm stroke impact without jarring the conveyor frame.
Light Milling Clamp
Secures aluminium extrusions for machining, delivering 402.2 N of clamping push at 0.5 MPa while the SUS304 barrel shrugs off cutting fluid splash.
Pallet Stopper Gate
Acts as a high-speed pallet stop where the CA pivot allows self-alignment, and the riveted compact body fits neatly within tight conveyor side-frame clearances.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA the Right Cylinder?
When sizing this 32 mm bore, step down to the MFC25 (245.3 N push at 0.5 MPa) for lighter duties, or step up to the MFC40 (628.3 N at 0.5 MPa) if your payload exceeds 241 N. The variable air cushion is essential when cycling at high speeds or moving heavy masses, as it decelerates the piston smoothly to prevent impact damage. Because this is a non-magnet SKU, position sensing is unavailable; choose an -S model if you require CMSG, DMSG or EMSG switches. Mounting is handled via the integrated CA rear pivot, and remember that air pressure alone will not hold a load during air loss—install an external rod lock or pilot check valve if drift is unacceptable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA FAQ
This 32 mm bore double-acting cylinder pushes 402.2 N and pulls 345.6 N at 0.5 MPa. At 0.7 MPa it pushes 563 N and pulls 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It uses a 1/4" port, a 12 mm rod, and a male M10x1.25 rod thread.
No, this specific SKU lacks a piston magnet and cannot accept CMSG, DMSG or EMSG switches; you must select the -S variant for sensing. Additionally, the variable air cushion only decelerates the piston near the stroke end and does not function as a brake or lock to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X110CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.