Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 65mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke65 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore mini cylinder relies on a needle-set variable air cushion at both ends to soak up high-speed end-of-stroke shock. The riveted aluminium covers and SUS304 stainless barrel resist mild corrosion and washdown, while the JIS-standard round-body construction is notably shorter than an ISO 6432 cylinder of the same bore and stroke, saving valuable mounting length.
Equipped with a 1/4" port, an M10x1.25 male rod thread, and a CA rear pivot cover, the unit is primed for demanding cycles. The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG switches. For payload sizing, a safe working load is roughly 241 N, and it can vertically lift about 20.5 kg with a 2:1 safety margin.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA Is Used
Package Diverting
Handles 20 kg cartons at high cycle rates on a sorting line, using the variable air cushion to prevent harsh slams when shifting packages.
Clamp Actuation
Secures mild steel workpieces for machining, delivering 402.2 N of clamping push force at 0.5 MPa without bouncing the fixture.
Vertical Lifting
Raises lightweight tote bins in a washdown-prone packing zone, relying on the SUS304 stainless barrel to resist moisture.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MFC25 provides 245.3 N of push force at 0.5 MPa, whereas moving up to the MFC40 yields 628.3 N. Choose this model when moving heavier masses at high speeds, as the adjustable air cushion is essential for decelerating the load smoothly and quietly compared to a fixed bumper.
Remember that the cushion only decelerates the piston near the stroke end; it does not function as a brake. If your application must hold a load vertically during air loss or valve centering, fit an external rod lock or pilot-operated check valve, as the piston will drift. Mounting is facilitated by the CA back cover pivot, and the integrated magnet (-S) supports position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA FAQ
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the variable air cushion only decelerates the piston near the end of the stroke and acts purely as a shock absorber, not a brake. The piston will drift on air loss or valve centering, so you must use an external rod lock or pilot check valve for holding suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X65SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.